Will a DVD player work with a smart TV?

You’ll need to hook up the DVD player to a smart TV using either an HDMI, composite, component or S-Video cable. Once connected, you need to select the proper source or “input” on your TV to be able to view the DVD player for use.

Is there a way to hook up a DVD player to a TV?

Actually, there are 3 types cables to connect a DVD player to a TV, HDMI, A/V cable and component cable. No matter which way you choose, you still need the cable to connect the DVD player to a TV. How do you hook up a DVD player to a TV that has no yellow input? Actually, composite cables (A/V cables) have ends that are red, white and yellow.

What kind of cable do you need to play a DVD?

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. Play a different DVD to determine whether or not the problem is being caused by the disc itself.

What to do when your DVD player wont play?

Try looking at the ends of the s- video cable and make sure none of the pins are bent or broken. If thats good try the regular rca type video cables . If they work then you know its one of the problems I described.

What do I need to hook up my HDMI to my TV?

Make sure that both HDMI connections are secure. An HDMI connection only requires one cable that carries both audio and video signal, and it does not matter which end goes where. But if the cable is pulled too tightly, or one of the connections is loose, you may not get a good signal.

Actually, there are 3 types cables to connect a DVD player to a TV, HDMI, A/V cable and component cable. No matter which way you choose, you still need the cable to connect the DVD player to a TV. How do you hook up a DVD player to a TV that has no yellow input? Actually, composite cables (A/V cables) have ends that are red, white and yellow.

Try looking at the ends of the s- video cable and make sure none of the pins are bent or broken. If thats good try the regular rca type video cables . If they work then you know its one of the problems I described.

Ensure the video cable between the DVD player and TV is securely connected to both devices. NOTE: For best picture quality, use an HDMI, DVI, Component Video, or S-Video cable if both the TV and DVD player have one of these connection types. Play a different DVD to determine whether or not the problem is being caused by the disc itself.

What happens if you put a DVD player on top of a TV?

Make sure the DVD cables will reach the TV from the shelf you choose. Because the player has a motor inside, it creates heat. Placing the DVD on top of or underneath other devices may cause overheating [source: Fleischmann].