Why my audio is not working when HDMI?

Set the audio output setting of the source device to output a compatible audio signal. IMPORTANT: If using a set-top box, make sure the volume is turned up on the set-top box. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV.

Why is my TV’s HDMI port not working?

Disconnect and reconnect the HDMI cable Disconnect the HDMI cable from the HDMI Input terminal on the TV. Turn on the TV and connected device again to let them recognise each other. If the issue continues, repeat the process but try a different HDMI input on your TV to see if this improves the situation.

How do I enable HDMI input?

Right-click the “Volume” icon on the Windows taskbar, select “Sounds” and choose the “Playback” tab. Click the “Digital Output Device (HDMI)” option and click “Apply” to turn on the audio and video functions for the HDMI port.

How do I get sound to play through my HDMI cable?

Right-click the volume control icon on the bottom taskbar and click on “Playback Devices” to open the pop-up window for sound options. In the “Playback” tab, select “Digital Output Device” or “HDMI” as the default device, click “Set Default” and click “OK” to save the changes.

How do I fix my HDMI port on my TV?

How to Repair Broken HDMI Ports on a TV

1. Unplug the television and set it on a flat work surface.
2. Remove the outer housing of the TV.
3. Examine the broken HDMI port.
4. Re-solder a broken connection, if you find one.
5. De-solder the broken HDMI port if the port is physically damage beyond repair.

How do I change the audio output to my TV HDMI?

How do I change my sound output to HDMI?

You can set the HDMI audio signal output of playback devices connected to the receiver via an HDMI connection.

1. Select [Setup] – [HDMI Settings] from the home menu.
2. Select [Audio Out].
3. Select the setting you want. AMP: HDMI audio signals from playback devices are only output to the speakers connected to the receiver.

How do I get sound out of my monitor?

5 Best Ways to get sound from monitor without speakers [inbuilt Audio]

1. Using an HDMI Audio Extractor. Using and HDMI Audio extractor that goes between the audio source, you can use an HDMI Audio extractor to get the sound outputs.
2. Using audio connector from your primary device.

Why is my HDMI port on my TV not working?

If the source video works correctly in HDMI port two, but still does not work correctly in HDMI port one, then you know that you have a problem with HDMI port one. If your HDMI port is bad, it is recommended that you should replace the main board in your TV.

Why does HDCP cause errors on your HDTV?

In the case of the HDMI standard and digital video, the HDCP DRM standard causes an unfortunate number of headaches for regular old consumers just trying to enjoy their televisions and engage in other legitimate activities.

How to get HDMI to work on my TV?

1 Verify which HDMI® input on the TV that the source device is connected. 2 On the supplied TV remote control, press the INPUT button repeatedly until it displays the correct HDMI input where the source device is connected. 3 Disconnect the HDMI cable and then reconnect it.

Why do different TVs have different HDMI ports?

Different TVs will have different amounts of HDMI ports. These ports are responsible for taking in audio and video through an HDMI cable from a source such as a blu-ray player, cable box, satellite box or gaming system amongst others.

Why is my HDMI cable not working on my TV?

Try a new or another known working HDMI cable. If you have another source device, connect it to the same input to determine if the problem is with the input or with the original source device. If you have another source device connected to your TV, switch to that input.

What to do when HDCP is not supported on your TV?

Unplug the HDMI cables from the TV set. Wait 5 minutes, plug ONLY the power cords back in, turn on ALL the units. Wait one more minute, then plug the HDMI cables back in. That resets the TVs HDMI. See if you still get the HDCP not supported display.

How to enable HDMI input on my computer?

To use HDMI input on your PC it should support HDMI in settings. Insert the other end of the HDMI cable into the HDMI-in port on the computer, located on the lower-left side of the monitor. Press the HDMI IN button, which is located on the underside of the lower-left corner of the monitor. The computer switches to HDMI mode.

How to check if my HDMI port is working?

HDMI Set as Default Device for Playback 1 Open the Control Panel. 2 Go to Hardware and Sound>Sound. 3 On the Sound window, go to the Playback tab. 4 Now select the HDMI output device and click on Set as Default 5 Reboot your computer and check if the HDMI playback is working fine.