Why is my Yamaha rx-v685 HDMI output not working?
Why is my Yamaha rx-v685 HDMI output not working?
It appears my output problem started when I accidentally pressed the HDMI Out button when trying to power off the unit without knowing it. The HDMI Out button is dangerously close to the power button and easy to hit accidentally.
How does the HDMI out on a Yamaha receiver work?
The HDMI out has pins that connect to something that is only a short distance away and just basically seems to be a hole in the board, and then also has pins where they go much further and connect to some type of processor. -Determining if any of the capacitors are bad.
Why does my Yamaha receiver stop playing sound?
I have a Yamaha RX-V671 receiver that just stopped putting out sound completely. This happens on all inputs, including HDMI, Sonos connected via optical audio input, and even the tuner. Video from HDMI inputs works just fine.
Why is my Yamaha HDMI not working properly?
Power supplies are not uncommonly faulty and early failure can affect some parts of the device before the others. If you’re looking for dead caps, they’re also most likely to be in the power supply. There’s lots of resistors and capacitors on those boards. They’re just a lot smaller than you are familiar with.
What kind of audio does a Yamaha RX v671 have?
Network AV Receiver with 6 in/1 out HDMI (3D and ARC compatibility), iPhone app compatibility, front panel HDMI and USB connections, HD Audio decoding with CINEMA DSP 3D, and 1080p upscaling. 7-channel 1,050W = 150W x 7 (4 ohms, 1 kHz, 0.9% THD, 1ch driven); 630W = 90W x 7 (8 ohms, 20 Hz-20 kHz, 0.09% THD, 2ch driven)
What do you need to know about the rx-v671 network AV receiver?
RX-V671 Discontinued Network AV Receiver with 6 in/1 out HDMI (3D and ARC compatibility), iPhone app compatibility, front panel HDMI and USB connections, HD Audio decoding with CINEMA DSP 3D, and 1080p upscaling. 7-channel 1,050W = 150W x 7 (4 ohms, 1 kHz, 0.9% THD, 1ch driven); 630W = 90W x 7 (8 ohms, 20 Hz-20 kHz, 0.09% THD, 2ch driven)
It appears my output problem started when I accidentally pressed the HDMI Out button when trying to power off the unit without knowing it. The HDMI Out button is dangerously close to the power button and easy to hit accidentally.
How many channels are in a Yamaha v671?
7-channel 1,050W = 150W x 7 (4 ohms, 1 kHz, 0.9% THD, 1ch driven); 630W = 90W x 7 (8 ohms, 20 Hz-20 kHz, 0.09% THD, 2ch driven) AV Controller app for operating various functions from an iPhone, etc. The colors and finishes shown may vary from those on the actual products.
