Why is my surround sound not working with my TV?

You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver.

How do I test my speakers on my Denon receiver?

To setup your receiver to output the test tone from the speakers, press the Setup button and select Speakers>Manual Setup>Level>Test Tone Star. You can now select and adjust the speakers’ audio level using the “UP, DWN and SIDES arrows” buttons on your remote control.

Why does my Denon surround sound not work?

The input select in the setup is set as AUTO. The MYSKY decoder is on MPEG/PCM, and switching to Dolby makes no difference except the sound is quieter. . Annoying thing is that I know I had a similar problem when I first set this up about a year ago, but using google or anything can’t seem to figure it out.

Are there any speakers on my Denon TV?

Not in ” pure” speaker mode which is stereo only. ???? Go through all movie speaker options. The input signal only shows 2 speakers, although there are 4 shown on the right hand of the screen under active speakers. Yep, test tone still has sound through rear speakers. No change in speakers wires or connections.

Can a 5.1 surround sound work on a Denon 1712?

Yes…and no. The surround back speakers are for 7.1. For 5.1, though, you use the rear surround jacks. Well I changed it from Surround back to Surround Right. No audio still. It doesn’t seem right as well.

How to use Denon arc on a TV?

Select “TV AUDIO” from the input source select buttons on the remote control or the receiver. You should now be able to output the TV audio through your AV receiver. Note: To use ARC you must turn on HDMI control in the menu of the receiver, as well as the TV.

Are there any surround speakers on my Denon receiver?

So I made the mistake of not testing MYSKY on channel 1,2,3 which have Dolby, I did that now and the input is shown as Dolby Digital with the surround speakers listed using the info button. Also the same with a bluray disc, but even turning up the volume no sound from those surround speakers, only the front 2 and the sub.

Yes…and no. The surround back speakers are for 7.1. For 5.1, though, you use the rear surround jacks. Well I changed it from Surround back to Surround Right. No audio still. It doesn’t seem right as well.

Can a Denon 2113avr use a subwoofer?

The manual isn’t clear but it might well be the case that direct mode will not use the sub. It does say that regular stereo (i.e. not direct) mode will output to the sub as well though. Failing that I would guess you will need to connect to a TV and bring up the speaker configuration menu unfortunately. I have a Denon 2113AVR which works well.

What should I do if my Denon arc is not working?

I reset the Denon and reset the TV. It didn’t help. 2. Procedure using a HDMI cable Connect the HDMI cable from the ARC HDMI input connector on your TV to the ARC HDMI out (Monitor) connector on your AV receiver. Select “TV AUDIO” from the input source select buttons on the remote control or the receiver.