news March 12, 2026

Why is my pioneer VSX not switching on?

Written by John Parsons — 0 Views

Why is my pioneer VSX not switching on?

With the power totally disconnected from the receiver, disconnect all the speaker cables from the receiver, reconnect the power to the receiver, switch on the power outlet (if this is the case where you are) and check if the receiver switches on OK. If it still doesn’t switch on, there is a fault in the receiver itself.

Is there a problem with the pioneer receiver?

It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual. Assuming that it’s out of warranty the cost of repairing the HDMI board is prohibitive. You could get an HDMI input selector with audio extraction. Connect your sources to it with HDMI.

Where does the HDMI go on a pioneer receiver?

The HDMI out goes to the projector and the digital audio out to the receiver. You won’t get lossless audio like Dolby TrueHD but will work fine with Dolby Digital and DTS. It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual.

How does an AV receiver work with a TV?

However, the AV receiver also sends its video output to the TV, and all its inputs are HDMI, which can carry audio and / or video, as opposed to just audio. So the AV receiver is the only device plugged into our TV, and the input devices that send it audio and video to the receiver are:

What’s the latest version of the pioneer AV receiver?

Be prepared for 4K Ultra HD video. All 2015 Pioneer AV receivers support HDCP 2.2 for the ultimate experience in high-definition content. Stream entertainment from virtually any room in your house with dual-band, 2.4 and 5.8 GHZ WiFi-a/b/g/n certified connectivity and new IOS and Android apps to share across your home network.

What’s the arc channel on a pioneer receiver?

Any help greatly appreciated! ARC is audio RETURN channel. That is for bringing audio FROM the TV back to the receiver. That option will not affect your issue. What you need to look for is an option in the receiver to output HDMI to the amp or passthrough to your TV.

What kind of HDMI Jack does pioneer vsx-1124 use?

The VSX-1124 and VSX-80 also support UHD upscaling. These receivers are Roku Ready certified. Plug a Roku Streaming Stick (3400M, $70) into the rear MHL-enabled HDMI jack, and enjoy movies, TV shows, and music. The jack also supports any MHL 2.0 phone.

How to start vsx-1124-k AV receiver Recepteur AV?

Launch Explorer and then right-click <VSX-1124> displayed in the ‘Network’ folder, then click ‘View device webpage’. Using Mac Launch Safari and click <VSX-1124> displayed in ‘Bonjour’ on the Bookmarks bar. Using iPad/iPhone/iPod touch Download a free application, iControlAV5, from the App Store.

Where do I find vsx-1124 on my Mac?

How many HDMI inputs does the pioneer vsx-1124-k have?

The all-new VSX-1124-K is an unparalleled system for getting the most out of your home theater experience. Offering six HDMI 2.0 inputs, the VSX-1124-K handles 4K2K Ultra HD video at 60 frames per seconds. 4K Ultra HD is the latest high-definition video display format, with four times the resolution of 1080p.

Launch Explorer and then right-click displayed in the ‘Network’ folder, then click ‘View device webpage’. Using Mac Launch Safari and click displayed in ‘Bonjour’ on the Bookmarks bar. Using iPad/iPhone/iPod touch Download a free application, iControlAV5, from the App Store.

Launch Explorer and then right-click displayed in the ‘Network’ folder, then click ‘View device webpage’. Using Mac Launch Safari and click displayed in ‘Bonjour’ on the Bookmarks bar.

What’s the price of a pioneer AV receiver?

Annual turnover brings new receivers in both of Pioneer’s receiver lines, the Elite line and regular line. The new Elites include the VSX-80 ($700) and VSX-44 ($500). In the regular line, the new entries are the VSX-1124 ($600), reviewed here, plus the VSX-1024 ($500) and VSX-824 ($400). None have the new Dolby Atmos functionality.

How can I tell if my pioneer receiver is working?

Locate the POWER cord for the pioneer receiver and unplug it from the wall outlet. Turn on the receiver and see if you have sound. Leave everything turned on and connected. Locate the POWER cord for the cable box and unplug it from the wall outlet. After several minutes the cable box should come back to normal, see if you have sound.

What did Tina Turner do for her fans?

TINA TURNER bids a final farewell to her fans in a touching new film that shows how she has overcome her painful past and finally found happiness.

What did Ike Turner say to Tina Turner?

When Tina woke up in the hospital after recovering from the overdose, Ike told her, ” You should die .” If you or anyone you know is having suicidal thoughts, please call the National Suicide Prevention Lifeline at 1-800-273-TALK (8255). In 1976, Tina Turner fled Ike Turner with nothing more than 36 cents and a Mobil gas card in her pocket.

Why does my pioneer VSX receiver stop working?

Hey so I bought a Pioneer VSX receiver about 4 months ago and it suddenly stopped working. The receiver turns on but no sound comes out of the speakers. I plugged in headphones and there was some sound but it wasn’t very loud, even on full volume.

What to do if your pioneer receiver suddenly stops working?

IF nothing has changed then it doesn’t sound too good. If it’s new, I’d say look into getting it serviced under warranty. If it’s not, call around for estimates and compare the cost to fix it with replacing it. I don’t know if this will help, but try unplugging your amp for a few minutes, see if that does anything.

Is the sound working on my pioneer TV?

— As indicated earlier, the sound is working fine on multiple other TV’s on the same cable service and line). The sound now seems to be back to a ‘sound with intermittant ‘no-sound’ patches. Box to TV connection is HDMI; Box to receiver connection is Optical, Receiver to TV seems to be through the cable box via the optical cable.

How to repair pioneer VSX 522-k Audio Unit?

If you’d like to have the unit repaired you can contact Pioneer to start a repair ticket at the link below:

Is there a manual reset for pioneer vsx-1020?

Brian I have a Pioneer VSX-1021K receiver where the Advanced MCACC button is flashing on and off in red. I have tried the manual reset … read more I have a vsx-1019ah-k receiver.

How to reset a pioneer a / V receiver from protection mode?

Thanks again. I have an Onkyo TX-DS575X that is apparently in protection mode…any ideas on how to reset it? unplug it and hold the power buton for 5 seconds.i dunno if that’ll work cuz its instructions on how to reset a Kenwood vr-6070 but it might, try it.

Why is my pioneer VSX 821 K not working?

Used this receiver one day, the next it was dead. There was no power outage or surge. There is no display and not responding to the remote or switch. Checked all the power components and they appear to be okay. Getting power to the unit, but not going through the transformer on the power supply board.

When did the pioneer VSX 1019ah-k come out?

Editors’ note: The review has been updated since publication in June 2009 to indicate that the VSX-1019AH-K has earned the Editors’ Choice award. It’s tough to make an AV receiver stand out from the pack, but the VSX-1019AH-K is likely to catch your eye on a retail shelf.

How to reset pioneer vsx-821-k power not surge?

Cut repair costs, not quality. teresa, there is an error log that can be run (if you’re quick) and a reset procedure. error detection count – (from OFF/STANDBY state) press & hold [PRESET <–] & [ STANDBY/ON] buttons. Release when the unit powers on. each press of [ENTER] key display a protection error count.

What do you need to know about the vsx-919ah-k?

VSX-919AH-K · Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft. · Improve product development Your input helps us continue to design products that meet your needs. · Receive a free Pioneer newsletter

Can a pioneer vsx-522-k play over HDMI?

Per the VSX-522-K owner’s manual, page 14, the OSD will only be displayed over an RCA video connection – it will not work over HDMI. That’s pretty inconvenient, but that’s what the manual says. Regarding audio over HDMI, check out page 28 of the manual. You’ll want to make sure that the HDMI audio is set to “AMP” instead of “THRU.”

How do I change the signal on my pioneer TV?

On the Pioneer, after you select the “TV” input source, make sure that the signal input is “O1” (check out page 21 of the owner’s manual). If it isn’t, press the “SIGNAL SEL” button on the remote control until the signal changes to “O1.” 3.

What should I do if my pioneer sub is not working?

If it’s really low, you might need to turn the volume down on the sub and the sub level up on the Pioneer – this will send a higher signal level from the Pioneer to the sub, which makes it easier to trigger the input sensor on the sub and have it turn on. What are you listening to? There might not be much/any bass in it.

How much does it cost to fix a pioneer sound board?

Pioneer has been offering a free fix to this ($600) problem. On March 7th 2019 I received approval to have this board replaced at no charge. It must be fixed at their HQ. They are sending me a prepaid shipping box.

How do I Turn On my pioneer VSX 821?

Unplug the power cord from the electrical wall outlet. Plug the power cord back into the electrical wall outlet. Press the power button to turn on the stereo system. Press and hold the STOP button and folder minus button at the same time until the word RESET appears on the display panel. Was this answer helpful?

Why does my pioneer AV receiver shut down?

Plug the power cord back into the electrical wall outlet. Press the power button to turn on the stereo system. Press and hold the STOP button and folder minus button at the same time until the word RESET appears on the display panel. Was this answer helpful? Hello my pioneer av receiver 834 purchased a month back why does it gets shut down?

How do I Turn On my pioneer stereo?

Press the power button to turn on the stereo system. Press and hold the STOP button and folder minus button at the same time until the word RESET appears on the display panel. Was this answer helpful?

Is the pioneer vsx-1022-k a good AV receiver?

The AV receiver has built-in networking, with support for Pandora, DLNA, and Internet radio, plus you can control it from your smartphone. Discounts can bring the price down significantly. The Bad The VSX-1022-K has some puzzling omissions, such as the lack of second-zone audio functionality and limited streaming-audio support.

What can I do with vsx-1022-k Ethernet port?

Built-in networking: The VSX-1022-K’s Ethernet port allows for all kinds of networking functionality, including AirPlay, smartphone control, and media streaming via Pandora, DLNA and Internet radio.

Why does my pioneer AV receiver 834 shut down?

Where is the enter button on a pioneer receiver?

On Pioneer receivers, you unplug the unit, fully powering it down. Plug it back in, but do not power it up yet. On the front panel, find the button marked “Enter”. Depending on unit, this may be a single isolated button or a bar type button along a line of such bars.

Is there a remote control for the pioneer vsx-823?

Because the VSX-823 is a networked receiver, simply download Pioneer’s ControlApp at no charge, turning your Apple or Android device into a remote control for the VSX-823.

Is the vsx-823 network AV receiver made for iPhone?

The VSX-823 features the latest Made for iPhone and iPad certification, which includes the iPhone5 and the iPad Mini. Since this receiver is networked, it also supports Apple’s AirPlay wireless music streaming technology allowing you to wirelessly stream music from your iPhone, iPod or iTunes directly to the receiver. That is just half the story.

Can a speaker be disconnected from a receiver?

With the power totally disconnected from the receiver, check that the speaker wiring to the receiver is OK and that there are no short circuits between the wiring connections at either end, speaker or receiver or even from the speaker cable wires at the receiver end to the case of the receiver.

How to fix sound issue in Pioneer stereo receiver?

How to fix sound issue in Pioneer Stereo receiver? when i turn the volume knob sometimes the sound keeps going on and off. Please help. Is this a good question? a few more informations would make it easier to answer this.

Why is my Pioneer Elite not playing subwoofer?

Press SYSTEM SETUP to confirm. OK appears in the display to indicate that the receiver has been reset to the factory default settings. Now connect the Subwoofer cable (Sub Out from AVR to L input on the Sub) Set the subwoofer level to 50% rotation, Power ON, X-Over control all the way clockwise, Phase control 0 degrees.

How old is the Pioneer Elite VSX 26tx?

Pioneer Elite VSX 26TX. It’s 2 years old and was purchased new. It isn’t driven very hard, though used daily. Connected to the receiver are: 3 very poor speakers, 27″ Sony TV, Pioneer DVD player (digital audio coax), Mitsubishi SVHS, and a DISH network receiver (optical digital audio).

Why is my Pioneer Elite not outputting sound?

Other than the digital audio connections for the DVD & DISH, the audio connections are using Liberty connectors. All components are working great and there are no problems with the speakers. The symptoms began a few weeks ago. Periodically, the receiver would not output sound on power-up.

What should I do if my VSX receiver is not working?

Reset breakers and replace blown fuses with others of the exact same rating. If you are using the remote control, check the batteries and replace them, if necessary. As a last measure, remove the power cord from the electrical outlet and then reconnect it to try and reset the system.

How to turn on VSX 914 a / V receiver?

This is the procedure from your manual: – 1 Switch the receiver on. button for about three seconds. display, press the TONE button. OK? shows in the display. 4 Press TONE once more to confirm.

Where is the ue22 error code on my pioneer vsx-1121?

No UE22 error code, no more weird Static/Crackling noises on my Pioneer VSX-1021-K – Locate the DTS chip. Its in the middle of the top circuit board (the one connected to HDMI) (see image below)

Why is my pioneer HDMI not connecting to my TV?

The problem: I connect everything like before, but I can’t see or hear anything. Projector show it’s “No signal”-message and there’s no sound coming from the set of speakers. There’s this “HDMI”-text flashing on the receivers panel, and there seems to be a lot of possible reasons for that.

What does the vsx-819h-k 5 channel a / V receiver do?

The VSX-819H-K was designed as a high-definition control center for all your HD devices such as a Blu-ray Disc player and game console. With support for Deep Color and x.v.Color technologies, you’ll experience stunning picture quality on your HDTV.

Is the pioneer vsx-1020 audio / video receiver locked up?

Pioneer VSX-1020-K Audio/Video Receiver: i have a Pioneer VSX-1020-K Audio/Video Receiver that appears to be locked up. it won’t come one with the radio remote or the standard remote. “It’s NFL sunday … read more i owen a pioneer audo/video multi-channel reciver vsx-518 .

Why is my pioneer AV receiver not turning on?

My Pioneer AV Receiver VSX-329 is not turning on. The hdmi My Pioneer AV Receiver VSX-329 is not turning on. The hdmi red light is flashing rapidly. Have tried to reset the error by holding down power and … read more My Pioneer elite receiver seems to be in a a sleep mode and I’m not able to turn on.

What are the features of the pioneer vsx-1021-k?

The VSX-1021-K has the most extensive set of iPod/iPhone features available in an AV receiver, going beyond other manufacturers by even including an iPod USB cable–no small favor, considering Apple charges $20 for one. Pioneer also has the AirJam feature, which lets multiple iOS devices add songs to a group playlist.

Why is my pioneer VSX D812 not powering on?

My Pioneer VSX D812 can still power on (LED not flashing) but can not detect audio and video signals due to a extremely low voltage earlier this month. The tuner is still working. I hope someone can help me revive it.

Why is my pioneer vsx-914 a / V receiver not power on?

At the very least the BIOS is corrupted and more likley the DSP board is destroyed. With a receiver of that age it is unlikley repair will make economic sense, but by all means see if a reapair shop will give you an estimate. When you have it repaired, or buy a new receiver, include a UPS in the budget.

Is the vsx-1020-k a registered trademark of pioneer?

VSX-1020-K Specifications and design subject to modification without notice. PIONEER and the Pioneer logo are registered trademarks of Pioneer Corporation. The impedances indicated are actual values that speakers can present to an amplifier while playing back music. They do not refer to the nominal rated impedances of speakers you use.

Why does my pioneer HDMI not turn on?

Related issues with HDMI have to do with the quality of the HDMI physical connections. These are mostly at the back of the top HDMI board on most Pioneer units. If you remove the top cover (side and back screws hold it on, then lift the back up, and pull up and out toward the back), you will see the top board.

How does a pioneer Chromecast Play surround sound?

My receiver is a Pioneer VSX-822-K and my Chromecast is directly connected to one of it’s HDMI inputs. From what I know from reading all the other threads, the server converts the DTS 5.1 (and other formats) audio to AAC 5.1 for the Chromecast. It then passes this on to the receiver as PCM 5.1 to play in surround sound.

Why does my pioneer TV sound cut out?

This appears to be a problem with a number of Pioneer receivers. Mine is a vsx-821, bought new, and HDMI audio started dropping out intermittently a while ago, and has continued to get worse. HDMI video remains solid, but the audio from HDMI sources goes in and out.

What are the features of the pioneer vsx-45?

With playback of high-resolution music files and full support for 4K Ultra HD video content, the feature-packed VSX-45 is no exception. It gives you a nice mix of solid performance and the latest features at a down-to-earth price.

How to diagnose receiver protection mode troubleshooting?

After 3 times goes into protection mode. I reset the receiver turning protect off. How do I diagnose the problem? It would help if you can procure the schematic. I would inspect the output capacitors, look for sign of burn/bulge.

Is there a pencil hole in my pioneer a / V receiver?

It’s a THX badged, 5.1 system from about 2 or 3 years ago. It does have a flip down panel on the front, but I can’t see a pencil hole?

Is the pioneer VSX 816 a good a / V receiver?

The Good The Pioneer VSX-816 is an affordable 7.1-channel A/V receiver that offers accurate and easy automated speaker setup and an abundance of connections, including three component-video inputs. This XM-ready receiver is capable of receiving the new XM Surround format, and it can be configured to biamplify compatible front speakers.

What’s the price of a pioneer a / V receiver?

Pioneer announced two new A/V receivers at January’s Consumer Electronics Show: the entry-level $200 VSX-516 and the step-up $300 VSX-816. Not surprisingly, the step-up model is the way to go.

How does mcacc work on the pioneer vsx1131?

Despite packing so much tech in, the VSX1131 is easy to set-up and use. Pioneer’s unique MCACC (Multi-Channel Acoustic Calibration) system tunes the receiver to the size of listening room and speaker placement, at the touch of a button.

What kind of sound does a pioneer VSX 1131 have?

The VSX-1131 is compatible with a wide range of HD audio formats, including DSD 5.6 MHz and FLAC 192kHz-24-bit for exceptional sound quality. DTS:X is the flagship processor from this highly respected tech company. It literally pushes the boundaries of what you can expect from home cinema.

What are the features of the pioneer Atmos receiver?

Pioneer’s unique MCACC (Multi-Channel Acoustic Calibration) system tunes the receiver to the size of listening room and speaker placement, at the touch of a button. A brand new feature, ‘Reflex Optimizer’ enhances object-based audio reproduction to make the most of Dolby Atmos enabled speaker systems.

What kind of AV receiver is pioneer vsx-1131?

There’s no VSX-931 this year, the feature-laden VSX-1131 taking its place – and this £550 AV receiver is a powerful beast. We start with the two-hour cinematic chase that is Mad Max: Fury Road, and the VSX-1131 roars into life.

What kind of AV receiver does pioneer have?

. . The Pioneer VSX-1123 7.2 Channel HD Multi-Zone Network ready AV Receiver featuring AirPlay, HTC ConnectTM, 4K Ultra HD Up-Scaling and MHL 2.0 compatibility.

Which is best VSX or VSX 931 AV receiver?

We’ve noticed things changing in recent years with the Pioneer’s budget and mid-priced VSX range of receivers gaining in richness and heft, with last year’s VSX-930 achieving a hitherto elusive fifth star. There’s no VSX-931 this year, the feature-laden VSX-1131 taking its place – and this £550 AV receiver is a powerful beast.

Is there a problem with my pioneer elite receiver?

Through some research at AudioReview.com, this appears to be a common problem with this vintage of Pioneer Elite receiver. Pretty annoying. When Ford, e.g., finds a systematic problem, they do a recall. When Pioneer finds a systematic problem, they apparently say T.S., unless you’re under warranty. No, I haven’t contacted them, yet.

How many channels does the Pioneer Elite vsx-90 have?

Discrete Direct Energy Amplification: The Pioneer Elite VSX-90 AV receiver is equipped with a discrete 7-channel amplifier rated at 100 watts (into 8-ohms, at 20Hz-20kHz, with 0.08% THD, driving 2 channels).

What can I do with my Pioneer Elite?

You can fine-tune your settings using your computer, smartphone, or tablet. The Interactive Contents section of the AVNavigator lets you explore all of the receiver’s features.

Is there a remote control for the vsx-90?

not present DTS Play-Fi No App Remote Control Yes On-Screen Display Thru HDMI Auto Speaker Calibration MCACC Pro

This is the procedure from your manual: – 1 Switch the receiver on. button for about three seconds. display, press the TONE button. OK? shows in the display. 4 Press TONE once more to confirm.

What to do if your pioneer a / V receiver shuts off?

Before you take it in anywhere, disconnect ALL speaker wires from the amplifier, and see if it still demonstrates the problems you’re describing. If it appears to operate normally, reconnect one speaker at a time, testing low and high volume levels before adding more speakers.

What can you do with a pioneer VSX 524?

This receiver will also help your music sound bold and detailed. You can even plug in your iPhone® or iPod® to play your digital music collection through your home theater speakers. The VSX-524 has connections for disc players, streaming video devices, network music players, cable/satellite boxes, and more.

Why is my Pioneer Elite reciever VSX 27tx not working?

Test noise is set to hightest sub volume, and it shakes the room. But in the THX mode, the sub does not work. I had is then connected to the B speaker outs, and it worked. BUT B shuts off in surround mode. I now have it tied into my A speakers. I have not clue what I missing??? Any suggestions, would be greatly appreciated.

Is the VSX 1123 K AV receiver waterproof?

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING

What are the front speakers on my VSX?

Receiver is the VSX-23TXH. My front speakers are 22-year-old Vandersteen 2Cs which I love as much as ever, not only for conventional stereo listening (turntable, tape, FM, etc.) but now also as fronts incorporated into a 7.0 system — which will be 7.1 as soon as I get around to acquiring an SVS or other appropriate sub.

What kind of inputs does the pioneer vsx-1123 have?

Offering more inputs than comparable receivers, the VSX-1123 features 8 HDMI inputs, including support for both 3D and 4K Ultra HD sources. The front HDMI terminal is MHL 2.0 (Mobile High-Definition Link) compatible, letting you connect and control compatible Android devices.

Why is my VSX pioneer subwoofer not working?

Last week I bought a VSX Pioneer receiver because my Sony had a short in it. My Sony use to make the sub-woofer vibrate the walls. I hooked this receiver up and have done all the speaker set ups like it said and I don’t get the loudness anymore either.

What to do if your TV receiver is not switching on?

If it is not switching on and is getting hot initially the best thing to do is to disconnect the power from the receiver and open it up and check if there is any obvious damage such as burnt out components etc.

How to repair a pioneer sx-780 receiver amplifier?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: rA05xSqRwaEJHMxf)

Is the vsx-523-k with HDMI no sound?

Pioneer receiver vsx-523-k with HDMI has vider but no sound. Pioneer receiver vsx-523-k with HDMI has vider but no sound. I removed HDMI from SAT/CABLE (DirectTV)…

How do you calibrate pioneer VSX 523-k AV receiver?

To calibrate your speakers, all you need to do is plug in the microphone included in the package to the MCACC jack and place the microphone on your ideal listening spot. When you run the calibration procedure, the Pioneer VSX-523-K will acknowledge various parameters including the size of your speakers when calibrating the speakers.

Why does my pioneer TV not have sound?

If you had sat connected to receiver via hdmi, and got sound to the tv speakers, then the receiver was either turned off (passthrough mode) or the receiver had the hdmi audio out (amp assign) set to tv. I think you should go back to the very beginning, do a factory reset on the pioneer]

Are there HDMI inputs in the pioneer vsx-523-k?

The back of VSX-523-K looks very minimal as well and the arrangement of terminals should make it easy for newbies that have never used an AV receiver before to understand. There are 4 HDMI inputs on the back and are all properly labeled so you can easily switch to them.

How many Watts Does a pioneer vsx-522-k speaker have?

With the same discrete direct energy design as the VSX-522-K, the power specifications are the same so you get 140 watts per channel. 5.1-channel speaker systems are supported and sound great as DTS-HD Master Audio and Dolby TrueHD decoders are onboard.

What’s the name of the new pioneer AV receiver?

Like some of its competitors, Pioneer decided to announce their new 2013 budget AV receivers back in March. The Pioneer VSX-523-K is one of the four AV receivers and it succeeds last year’s Pioneer VSX-522-K as the new entry-level model.