Why is my Pioneer Elite not outputting sound?
Why is my Pioneer Elite not outputting sound?
Other than the digital audio connections for the DVD & DISH, the audio connections are using Liberty connectors. All components are working great and there are no problems with the speakers. The symptoms began a few weeks ago. Periodically, the receiver would not output sound on power-up.
What kind of speakers does the pioneer elite receiver use?
Connected to the receiver are: 3 very poor speakers, 27″ Sony TV, Pioneer DVD player (digital audio coax), Mitsubishi SVHS, and a DISH network receiver (optical digital audio). All speaker connections are with 12 gauge speaker wire. All video connections are with Liberty S-video.
Do you need external speakers for pioneer TV?
It would probably work, but it doesn’t necessarily make sense. If you have a receiver, then I assume you have external speakers. If you have external speakers, then you don’t need any kind of audio connection between your receiver and TV (in either direction).
How old is the Pioneer Elite VSX 26tx?
Pioneer Elite VSX 26TX. It’s 2 years old and was purchased new. It isn’t driven very hard, though used daily. Connected to the receiver are: 3 very poor speakers, 27″ Sony TV, Pioneer DVD player (digital audio coax), Mitsubishi SVHS, and a DISH network receiver (optical digital audio).
Other than the digital audio connections for the DVD & DISH, the audio connections are using Liberty connectors. All components are working great and there are no problems with the speakers. The symptoms began a few weeks ago. Periodically, the receiver would not output sound on power-up.
Connected to the receiver are: 3 very poor speakers, 27″ Sony TV, Pioneer DVD player (digital audio coax), Mitsubishi SVHS, and a DISH network receiver (optical digital audio). All speaker connections are with 12 gauge speaker wire. All video connections are with Liberty S-video.
Why is the sound not working on my pioneer plasma?
From your description it sounds like your direct tv receiver may need a reboot. To do that first turn off the tv and unplug the direct tv` s receiver power cord for a couple of minutes. Then oce you plug back its power cord, wait 30 secs and turn the tv back on Okay. I’ll give that a try. Thanks. Okay.
How can I get sound from my receiver to my TV?
Unless your TV has ARC then you will not be able to get sound from your TV to your receiver via HDMI. If your TV does support ARC, you have to make sure you are plugging into the HDMI port that has that feature. Not all TVs support ARC and when they do, usually only one of the HDMI ports have it.
How to get on screen display on pioneer vsx-817?
I have Pioneer VSX-817S (used). I am trying to get the OSD to show up on my TV, but no luck. Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV. Clearing all the remote control settings: While pressing the RECEIVER button, press and hold the 0 button for three seconds.
How do I get on screen display on my pioneer TV?
I am trying to get the OSD to show up on my TV, but no luck. Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV. Clearing all the remote control settings: While pressing the RECEIVER button, press and hold the 0 button for three seconds. This does not work either.
Is there a problem with the pioneer receiver?
It does sound like the Pioneer receiver has an HDMI switching problem. That’s not unusual. Assuming that it’s out of warranty the cost of repairing the HDMI board is prohibitive. You could get an HDMI input selector with audio extraction. Connect your sources to it with HDMI.
Why is my pioneer HDMI not connecting to my TV?
The problem: I connect everything like before, but I can’t see or hear anything. Projector show it’s “No signal”-message and there’s no sound coming from the set of speakers. There’s this “HDMI”-text flashing on the receivers panel, and there seems to be a lot of possible reasons for that.
Pioneer Elite VSX 26TX. It’s 2 years old and was purchased new. It isn’t driven very hard, though used daily. Connected to the receiver are: 3 very poor speakers, 27″ Sony TV, Pioneer DVD player (digital audio coax), Mitsubishi SVHS, and a DISH network receiver (optical digital audio).
How can I Reset my Pioneer Elite subwoofer?
Switch the receiver into standby. While holding down the TONE button, press and hold the STANDBY/ON button for about three seconds. When you see RESET? appears in the display, press ENTER. OK? shows in the display.
