Why is my ion speaker not charging?

This symptom could be caused by a burned out Fuse. To determine if a burned out fuse is the potential cause of your battery not charging, connect the Job Rocker to a power source and look at the level meters on the back of the Job Rocker. Locate the fuse door next to the IEC power cable port on the rear of the product.

How do I turn on ion explorer extreme?

Navigate to your Bluetooth device’s setup screen, find Explorer Extreme and connect. When your Bluetooth device is connected, the Bluetooth icon will be lit solid on the master speaker’s Display, and you will be able to play audio from the Bluetooth device through your two linked speakers.

Is the ion explorer Outback waterproof?

No sweat—Explorer Outback 2 is iPX5 water-resistant, so it’s safe to leave in the rain. No more, “Oops, forgot to bring in the speaker” when the downpour hits. And with its 100-ft Bluetooth range, you can really roam around and still hear the music. This is one speaker that doesn’t back down from an outdoors challenge.

How do I connect to ion Explorer?

Navigate to your Bluetooth device’s setup screen, find the Explorer Bluetooth and connect. Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’. The Bluetooth LED on the Explorer Bluetooth will light up solid when it is paired.

How do I reset my ion Explorer Bluetooth?

If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break previous Bluetooth connections and reset the Bluetooth module.

How do I know if my ion speaker is charging?

*Note: To determine if the Solar Panel is providing charge to the battery, press and hold the Bluetooth button on the speaker (not on the remote) for 5 seconds. Once a tone is heard, release the button. If the tone continues to play after release, then the solar panel is providing charge to the battery.

How long does ion Pathfinder battery last?

When charged fully, the Pathfinder Charger has an incredible battery-life of around 100 hours when used at a low or moderate volume level. Battery life may vary based on temperature, age, and volume usage of the speaker.

How do I Bluetooth My Ion explorer extreme?

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on Explorer Extreme.
3. Navigate to your Bluetooth device’s setup screen, find Explorer Extreme and connect.
4. To disconnect pairing while the Bluetooth icon is lit solid, press the Bluetooth button.
5. To connect to another Bluetooth device, repeat step 3.

Can you connect two ion speakers together?

Yes! First, pair two Rock Speakers together, then link your Bluetooth-capable device to one of the Rock Speakers. Power on both ION Audio Rock Speakers. Simultaneously press the Link button on both of them.

Can a ION Audio Explorer Outback be replaced?

You sure can! The batteries in most ION Audio speakers, including the Explorer Outback, are user replaceable. You’ll need a screwdriver to remove the back panel of the speaker. You’ll have to remove the rear handles as well. Once the back panel is removed, the battery compartment is exposed and you should be able to easily swap the battery.

What kind of battery is in explorer Outback?

The battery in the Explorer outback is a 12V, 7.0Ah Lead Acid battery. For more information about the battery, or if you’re not sure which ION speaker you have, please visit What is Easy Pairing? What is NFC (Near-Field Communication)? Easy Pair is a form of NFC tap pairing, otherwise known as ‘bump pairing’.

What kind of radio does ion Outback have?

The Outbackstreams music wirelessly from any Bluetooth device and also has a built-in AM/FM radio. It comes with a microphone, so you can add the perfect personal touch to your party.

How do I Turn on NFC on ION Audio Explorer Outback?

Enter your device’s Settings menu and check that NFC is turned On (one time step). Power on the Explorer Outback. Gently bump your device against the ‘N’ logo located on Explorer Outback’s top panel, and hold it there for a couple of seconds. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “0000”.

How can I connect two ION Audio Explorer Outbacks together?

You’re able to connect two or more Explorer Outbacks together using a 1/8” (3.5 mm) stereo aux cable from the Speaker Link of one Explorer Outback to the Aux Input of the second Explorer Outback. A 2’ (61 cm) cable is included but a longer one can be purchased from a local electronics retailer.

Is the battery on an ion explorer Outback replaceable?

The batteries in most ION Audio speakers, including the Explorer Outback, are user replaceable. You’ll need a screwdriver to remove the back panel of the speaker. You’ll have to remove the rear handles as well. Once the back panel is removed, the battery compartment is exposed and you should be able to easily swap the battery.

The Outbackstreams music wirelessly from any Bluetooth device and also has a built-in AM/FM radio. It comes with a microphone, so you can add the perfect personal touch to your party.

Enter your device’s Settings menu and check that NFC is turned On (one time step). Power on the Explorer Outback. Gently bump your device against the ‘N’ logo located on Explorer Outback’s top panel, and hold it there for a couple of seconds. Follow the pairing instructions that appear on your phone. If a passcode is required, enter “0000”.