Why is my CD not playing?

If the disc still will not play, depending on the location of your CD player, the issue can also be caused by condensation. Open the disc compartment and let the unit sit for about one hour to allow any condensation to dissipate. 7. If the unit does not play any of the discs, the laser pick up may be dirty.

Does scratching a CD make it unreadable?

Scratching a CD or DVD Disc Eraser puts a number of deep scratches along a CD or DVD and renders it unreadable in a CD or DVD drive.

What to do if your CD player is not reading a disc?

The first is to purchase a CD/DVD laser lens cleaner disc, and run it through the system several times. If your player is not reading any discs at all though, then try purchasing a can of compressed air (available at Staples, or Wal-Mart).

Why does my CD ROM drive not work?

My Cd-rom/DVD drive won’t recognize the disc – says “No Media”. I have used the same disc on the same drive prior with no problem. The drive still works for other types of discs (audio, recordable CDs and recordable DVDs), just not with DVD-Roms.

How to get the unit to read CDS?

I used a Sony radio CD player without a disc placed into a Sony CD radio player by pressing a lid close button to say Reading, Play, and No Disc. The laser lens move right and left for a little bit, and laser lens goes up and down for 2 times, then it says No Disc.

Is there a CD player that can read CDS?

Sony CFD-S05 CD Radio Cassette Player was released in 2010, and has the CD-R/RW playback function. My CD player won’t read CDs will not even go to the first track.

Why do I get error when I try to read a CD?

One thing that comes to mind is that CD and DVD discs do wear out – or rather, they degrade over time. Now, normally, a degraded disc will more commonly show a different type of error. Specifically there will usually be CRC or other similar hardware related errors when you try to read the disc.

Can a recordable DVD be read on a CD ROM?

DVD recordable discs – If you have a recordable DVD that cannot be read, make sure it is not a first-generation DVD drive and that it supports recordable DVD media. Additionally, a standard CD-ROM, CD-R, and CD-RW drive cannot read DVD discs.

What can I do if my CD player says no disc?

One thing you might try is a CD lense cleaner. These are CD’s that have fine brushes on them, and something to make the player go to the specific track that has the brushes. The brushes then gently brush any accumulated dust off of the laser reader lens.

What to do if your CD-R drive is bad?

If all the above recommendations do not help to resolve the issue, the CD-R drive itself may be bad and need to be replaced. However, you can first try to clean the CD-R drive using a CD cleaning disc. If cleaning the CD-R drive does not help, the drive should be replaced.