Why does my Yamaha RX v673 cut out sound?

Everytime the freezer would turn on the HDMI would cut out causing a loss of picture, and sound. I replaced our freezer with a new one (old one was about 10 years old), and the problem was still there…So i plugged the freezer into another outlet and the problem went away.

How does the return channel work on a Yamaha AV receiver?

The Audio Return Channel function enables data to be sent and received via the same HDMI cable, so you can hear the sound from the TV via a single HDMI cable, with no need for an extra optical cable. In ordinary deinterlacing, pixels in areas of movement are interpolated by upper and lower ranges. This causes jaggies in diagonal lines.

Why does my Yamaha receiver keep cutting out?

I have had my receiver for just over two years now. The problem started small, but has gradually gotten worse and worse. Basically, the audio cuts out for a few seconds and then returns. Sometimes it does so every 10 minutes, sometimes every 30 seconds.

Why did the sound cut out on my Yamaha mower?

The sound cut out almost as soon as it started, the audio was out for much longer, and only came back briefly before cutting out again. Also, that crackling sound was much, much worse. The Yamaha engineer called me last night, and he is coming over tomorrow morning to have a look.

Why does my Yamaha RX v673 have no sound?

Mine does not produce any sound in any speaker / headphone. But when I switch to radio (AM) and select Pure Direct, I hear the some noise. But this happens only sometimes. Could not find any troubleshooting guide in the manual regarding this. Can someone please tell me what am I doing wrong?

How often does my Yamaha RX v673 cut out?

Sometimes it does so every 10 minutes, sometimes every 30 seconds. When it does cut out, the speaker icons disappear from the display of the receiver, and then return again just before the audio plays. I have tried using headphones, instead of speakers (speakers unplugged) – same problem.

How do I Reset my Yamaha rx-v673?

You can do the same thing by pressing the on button about thirty times before doing the reset. A reset may not work properly until all the caps are discharged. I always do that before resetting anything. You can do the same thing by pressing the on button about thirty times before doing the reset.

How old is Yamaha rx-v673 home theater receiver?

The problem areas are either the power to the processing board, or a major failure of the processing board. That means either service or replacement is required. That receiver first appeared in April 2012, so is likely five or six years old. So for a receiver in that mid pack price range it is slightly over half way through its useful life.

What to do if there is no sound from an AV receiver?

If the sound comes normally, please change other HDMI cable. If still no sound output from the AV Receiver/Sound Bar even after checking above points, please confirm if the AV Receiver/Sound Bar and the TV have the HDMI Control function. Was this answer helpful? Thank you for your feedback!

Why did my HDMI output on my Receiver stop working?

This A1010 is in a cabinet, top shelf with Coolerguys dual 120mm fans w/thermal control set to come on at 78°F, positioned directly above the A1010 top grill. The HDMI Output on my Yamaha RX-V667 stopped working today.

Is the Yamaha rx-v673 no sound HDMI?

A quick Google search on “Yamaha RX-V673 no sound HDMI” will return quite a few hits. TI apparently issued an alert about the chip in question and issued a replacement. However the chip (in the above-mentioned version) was used in the RS-V673.

Can a Yamaha v685 work with a HDMI cable?

I have had my RX-V685 for about 6 months now and has been working flawlessly up until today. I have it setup to send HDMI output on HDMI 1. When I turned my system today my TV was not seeing any input from HDMI 1 on the V685. I tried another cable, and I tried a different HDMI port on the TV but neither one helped.

Why is there no sound on my Yamaha receiver?

When I turn on TV, receiver recognizes it (HDMI input light comes on) and, automatically, changes to the default input (AV4) TV speakers automatically turn off (if receiver is turned on). TV remote will then control volume on receiver. But still no sound.

Everytime the freezer would turn on the HDMI would cut out causing a loss of picture, and sound. I replaced our freezer with a new one (old one was about 10 years old), and the problem was still there…So i plugged the freezer into another outlet and the problem went away.

What are the features of the Yamaha RX v677?

7.2-channel Wi-Fi Built-In high performance Network AV Receiver. Supports the latest HDMI version, 4K upscaling, AirPlay® and HTC Connect™. YPAO R.S.C. and YPAO Volume ensure optimum system sound quality and balance. Multi-zone operation allowssystem expansion.

Where does the arc come from on a Yamaha TV?

A possibility is to use an optical digital audio cable to the Yamaha (from the TV). I’ve spent several hrs. funging with the Samsung and the RX-V577 receiver. The “Input” selector for the receiver does not seem to list ARC anywhere, or anywhere to indicate that the audio input should be coming over the “HDMI Output” HDMI jack.

How to connect a Rockville EQ to a Yamaha rx-v567?

How to connect a Rockville EQ to a Yamaha RX-V567 Natural Sound AV Receiver/Amp with Polk Audio Surround speakers Solved! Dont quite understand yamaha YAS 108 configuration

Can You factory reset a Yamaha RX v679 display?

Factory reset is my last attempt at sorting it before sending it for repair Thanks. To do the factory reset you need to be able to see the screen or at least know what order to press the buttons. Factory reset is my last attempt at sorting it before sending it for repair

Why does my Yamaha receiver stop playing sound?

I have a Yamaha RX-V671 receiver that just stopped putting out sound completely. This happens on all inputs, including HDMI, Sonos connected via optical audio input, and even the tuner. Video from HDMI inputs works just fine.

If the sound comes normally, please change other HDMI cable. If still no sound output from the AV Receiver/Sound Bar even after checking above points, please confirm if the AV Receiver/Sound Bar and the TV have the HDMI Control function. Was this answer helpful? Thank you for your feedback!