Why does my Yamaha receiver keep switching inputs?

Try turning off the receiver CEC control function if it is on. 2. Some receivers will change to a different audio connection if the audio is lost in the HDMI. Make sure you have that HDMI input set correctly in the input set up menu and if you can turn off the auto detect try that too.

How do I reprogram my Yamaha receiver?

Steps

1. Set the unit to stand-by first by turning it off.
2. While holding down the Straight button, press the Power button.
3. Press the Right Program Arrow button repeatedly until INIT-CANCEL comes up.
4. Press the Straight Button repeatedly until INIT-ALL comes up.
5. Turn the receiver off and then back on.

How do I turn off the CEC on my Yamaha receiver?

RX-V473 Disable HDMI Control (CEC)

1. Press the Setup button and the On Screen Display Menu should come up on the TV/Monitor.
2. User the Arrow Down button to move down to the HDMI.
3. Press the Arrow Right button to highlight Configuration.
4. Press the Arrow Right button one time to change to OFF.

Do all HDMI cables support ARC?

Most HDMI cables should work with ARC. Plug one end of the HDMI cable into the ARC-capable HDMI input in your TV and the other into the ARC-capable output on your soundbar or receiver.

How to troubleshoot an arc Yamaha AV receiver?

ARC Setup / Troubleshooting for AV receivers. Verify Input Selection and volume: Receiver would be set to AUDIO 1 Input (initial setting). *The initial setting may differ depending on the product. For details, refer to the Owner’s manual.

What does my Yamaha a / V receiver automatically switch to?

Every time I switch it to an HDMI, it will automatic switch to Audio. It is very annoying because there is a five-ten second delay for when it does this, and it only does it 2/3 of the time. I can’t just sit back and relax and watch a movie or play a game, because at any second the receiver could take my sound away.

Why is there no sound on my Yamaha receiver?

When I turn on TV, receiver recognizes it (HDMI input light comes on) and, automatically, changes to the default input (AV4) TV speakers automatically turn off (if receiver is turned on). TV remote will then control volume on receiver. But still no sound.

Is there an arc between a Samsung TV and a Yamaha receiver?

HDMI ARC issues between Samsung TV and Yamaha receiver We have a UE48HU7500L Samsung Smart TV and a HTR 4071 Yamaha receiver, connected through an HDMI cable. Both are capable of ARC, and we’ve configured both the TV and the receiver to enable ARC. The HDMI cable is in the OUT port of the Yamaha receiver. The Samsung TV has 4 HDMI ports.

Every time I switch it to an HDMI, it will automatic switch to Audio. It is very annoying because there is a five-ten second delay for when it does this, and it only does it 2/3 of the time. I can’t just sit back and relax and watch a movie or play a game, because at any second the receiver could take my sound away.

ARC Setup / Troubleshooting for AV receivers. Verify Input Selection and volume: Receiver would be set to AUDIO 1 Input (initial setting). *The initial setting may differ depending on the product. For details, refer to the Owner’s manual.

Why does my Yamaha rx-v685 shut off on its own?

My Yamaha rx-v685 receiver keeps shutting off on its own periodically, sometimes after a couple of hours and sometimes after a few minutes. I can turn the unit back on and all is fine until it turns itself off again. I checked all the speaker wires and even disconnected them and that did not solve the problem.

How do I switch from arc to audio input?

It is assumed that you will watch TV and therefore it automatically switches to that input so you can listen to sounds coming from TV. Obviously, you don’t need that so you either turn ARC off or press the On Screen button on the remote to let it quickly switch to previously selected input.