Why does my Yamaha receiver have no sound?

⁠Sound may not output from AV Receiver/Sound Bar due to temporary HDMI identification error or recent software update on the TV. First, power off the AV Receiver/Sound Bar and TV, disconnect all the HDMI cables, and unplug the power cables. After five minutes, reconnect HDMI cables and power cables.

How do I setup my Yamaha RX V663?

Zone 2 Setup on RX-V663

1. Press the AMP Button.
2. Press the Set Menu Button.
3. Arrow down to Manual Setup.
4. Press the Enter button.
5. Arrow to the Basic Menu option and press Enter.
6. In the Basic Menu arrow to Speaker Set and press Enter.
7. Arrow to the Extra SP Assign and select ZONE2.

How do I update my Yamaha RX v677 firmware?

1. Power off the receiver (Standby mode)
2. Enter the ADVANCED SETUP mode.
3. Select “FIRM UPDATE” from the menu.
4. Start firmware update. While pressing the STRAIGHT key, press the MAIN ZONE key and keep. STRAIGHT key pressed until. “ ADVANCED SETUP ” appears on the front panel display.
5. Select “FIRM UPDATE” from the menu.

How long does it take to update Yamaha receiver?

Press the INFO button on your receiver to start the update process. Have a little patience (or a cup of coffee) – it can take up to 20 minutes for the update to install.

How do I get sound from my Yamaha receiver to my TV?

You need to use the HDMI input on the TV labeled ARC from the HDMI out on the receiver. You need to turn ARC on in the TV and select it as your source on the receiver. If you don’t have it in both then use the optical audio output of the TV.

Does Yamaha RX V663 support Arc?

I have a Yamaha V663 that is HDMI 1.3, so it does support ARC. I just got a new LG 55LM6700 and want to channel the audio for the apps back through my receiver for my surround.

Why does my TV sound keep cutting in and out?

Intermittent audio can be electronics in the Review, bad cable or contacts, or the TV itself. Start by reseating the HDMI cable at both ends; check to see if the contacts are dirty. Use another HDMI source (borrow if you don’t have one) to see if it’s the Review. Finally, see if another HDMI TV eliminates the problem.

Is the Yamaha rx-v663 an AV receiver?

In our experience most displays do a fine job without the AV receiver lending a hand. Regardless, the RX-V663 looks to be a very feature-laden receiver for very little cost. The two subwoofer outputs are especially attractive as is the internal decoding of the high definition dts-HD and Dolby TrueHD audio formats.

What are the specs of a Yamaha a / V receiver?

Yamaha RX-V663 A/V Receiver Specifications Specifications Rated max power:95Wpc, 20Hz-20kHz, 8 ohms Max THD:0.09% Speaker impedance range:6-16 ohms No. of zones:2 Analog audio inputs:six L/R pairs, phono, 7.1-channel Digital audio inputs:4 optical, 2 coax Analog audio outputs:2 L/R pairs (recording), 1 L/R pair (zone 2), 7.1 multichannel pre-outs

What are the buttons on a Yamaha remote?

AV receiver remotes are often a cluttered mess, but the RX-V663’s clicker is actually pretty good. There’s a direction pad in the center and just to the right are the main controls for volume. Source buttons are nicely separated, as are Yamaha’s “Scene” buttons.

What kind of DACS does a Yamaha a / V receiver use?

Quality Burr-Brown 192kHz/24 bit DACs and ADCs are in use and your rear channels can be assigned to zone two or to bi-amp your mains. In fact, the two receivers are more alike than dissimilar.

What does the Yamaha rx-v663 home theater receiver do?

The RX-V663 features time-tested Yamaha construction to deliver thrilling home theater audio performance. You get seven channels of clean, high-current amplification and exclusive Yamaha Cinema DSP processing that can transform all your movies, music, and TV shows into powerful, room-filling surround sound.

How many HDMI inputs does the Yamaha v663 have?

Setup & Tests As I mentioned earlier, the Yamaha RX-V663 has only two HDMI inputs, which is one of its biggest drawbacks. A year ago, this would have been appropriate for an AVR at this price, but some new models now have four HDMI inputs, including the Onkyo TX-SR606 that I recently reviewed for Home Theater.

AV receiver remotes are often a cluttered mess, but the RX-V663’s clicker is actually pretty good. There’s a direction pad in the center and just to the right are the main controls for volume. Source buttons are nicely separated, as are Yamaha’s “Scene” buttons.

What kind of inputs does a Yamaha a / V receiver have?

Both decode all the latest audio formats including Dolby Digital Plus, Dolby TrueHD, and DTS HD. Both have HDMI 1.3 inputs and plenty of analogue connections (including 3 in / 1 out component video). Both have 17 surround modes, YPAO auto calibration, and are XM and Sirius ready.