Why does my Sony TV keep saying please wait?

The solution to a ‘PLEASE WAIT’ message, is simply, a hard reset. One through the REMOTE CONTROL, and the other through the BUTTONS on the panel. When the bar keeps emiting a ‘PLEASE WAIT’ message, the remote method is useless. Before hard reseting the bar, it is essential to unplug all cables from the bar, ALL.

How do I reset my Sony sound bar?

How to reset the Soundbar

1. Press and hold the + (volume up) button, (power) button, and (input select) button on the unit for more than 5 seconds to reset the system.
2. Unplug the AC power cord.
3. Plug the AC power cord back in again, and press the (power) button to turn on the unit.

Is there a reset button on a Sony Soundbar?

Reset your Soundbar Press and hold + (volume up) button, (power) button, and (input select) button on the unit for more than 5 seconds to reset the system.

Why is my Sony Soundbar not connecting?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to TV input. Change the TV audio output setting to PCM and check whether sound is output.

Why does TV keep saying please wait?

Please wait means the software on your TV can’t boot the computer all the way to display a picture. That means you need to replace the TV’s main board, because that’s where your computer and software are located. It’s easy to replace it.

Why does my Insignia TV say please wait?

The Please Wait message indicates the TV’s mainboard (which is the processor for the TV), is either locked up- or has failed (in most cases this requires replacement of the board- especially on an Insignia this age. Then plug the set back in, and also check that the power cord is connected tight at the TV as well.

Why is my soundbar not working?

If you’re using an analog connection, make sure the TV volume is turned up. If the TV’s analog audio output is set to “variable” and you’re getting no sound from the soundbar, try turning the TV’s volume up. If the TV is turned down all the way, you’ll hear no sound even if the soundbar is set to full volume.

Where is the reset button on my soundbar?

For a factory reset, you need to locate the “Off” button on the control panel. Turn off your soundbar before you hold down the “Off” button for however long it takes for the soundbar to display “INIT OK”. After you see it on your soundbar, you can turn your device back on and try to pair it again with your TV.

Why does my soundbar not work?

How do you fix a TV that says please wait?

How long does it take for Spectrum to acquire channel info?

You will need to be patient as it can take around 30 minutes to update the firmware and any other software on it. If it is taking longer than 30 minutes and it is still stuck on the “Retrieving Channel Info” message with a blue screen. You need to ensure that you contact Spectrum for assistance.

What does my screen say ” please wait “?

My screen says “please wait…” and I cannot get it to go away. When the guide is showing (my cable is Spectrum) I can My screen says “please wait…” and I cannot get it to go…

When does my guide says ” Please wait “?

When the guide is showing (my cable is Spectrum) I can My screen says “please wait…” and I cannot get it to go… Owner/Operator of a custo… Run A/V and repair busines… My picture stays on for about 5 min then goes away. Sound My picture stays on for about 5 min then goes away. Sound continues.

Where do I find the serial number on my Sony stereo?

The serial number always starts with the letter V followed by 6 digits. You can print the serial number on the screen of your Sony CD unit. To do this, turn on your stereo unit and keep pressing buttons 1 and 6 for a few seconds. When doing this, different information displays for 30 seconds.

How do you reset the sound bar on a Sony?

On your soundbar, press and hold the (power) and – (volume) buttons for more than five seconds. If model-specific information is required to complete this step, check your manual. Manuals are posted on your model support page. Volume, sound settings, and personal information may return to the default settings after the reset.

What should I do if my sound bar turns off on my TV?

Check the HDMI CEC settings. If the soundbar turns off automatically when the TV turns off, this feature may be activated. For soundbars, check the Control for HDMI function. For TVs, check the BRAVIA sync function or similar settings related to the HDMI CEC function.

When does the sound bar turn off by itself?

Check Applicable Products and Categories for details. The soundbar turns itself off or enters standby mode automatically after a certain amount of time. This is normal operation. This happens when the soundbar doesn’t receive an input signal and not operated within 15 minutes. This feature is to cut down the power consumption of the device.

Why does my soundbar go into standby mode?

The soundbar turns itself off or enters standby mode automatically after a certain amount of time. This is normal operation. This happens when the soundbar doesn’t receive an input signal and not operated within 15 minutes. This feature is to cut down the power consumption of the device. This feature and the timer can’t be changed.