The Daily Insight

Connected.Informed.Engaged.

news

Why does my radio come on but no sound?

Written by Sophia Edwards — 0 Views

Why does my radio come on but no sound?

Possible Cause: Radio volume is down or radio is muted. Each speaker needs its own positive and negative connection from the radio. Shorted or grounded speaker wires or speaker terminals.

Is there a fuse for speakers?

No Sound at All From the Car Speakers Some amps have in-line fuses while others are fused at the amp itself, and some installations have more than one fuse. If you find that your sound comes back on if you open and shut the door, that may be the problem, or it could be a ground issue.

Can a blown fuse cause speakers to not work?

Here are some of the most common reasons that may have caused your car speakers to stop working, which are as follows: Blown fuse. Damaged signals wire. One speaker working and the other is not.

What to do if your audio system has no sound?

I can still turn on radio, CD, Satellite, Aux, and the screen works (shows channel or CD track#), but no sound comes out of it. It seems like something muted it. However, I can’t find any button or menu item to mute/unmute. Any guidance on how to diagnose and fix the issue?

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

Why is there no sound in my car?

There is noise, cracking sound, static or no audio through the speakers of the car stereo system. Noise in your car audio system can be caused by more than one issue. Noise can be static, whine, hiss, distortion, or other sound issues.

Why is there a noise coming from my Radio?

Noise is heard only when listening to the radio . If the noise is only heard when listening to the radio, it may be coming through the antenna. Remove the antenna wire from the receiver. If the noise goes away you may need to install an antenna noise suppressor that plugs in between your antenna and the receiver.

Why is there no sound on my internet radio?

Lastly, look at your video (yes, I know its an audio issue, but video and audio often share common devices and drivers); what does it show for that device (same information that I asked for above)? Was this reply helpful? Sorry this didn’t help.

What to do if your surround sound is not working?

If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.

Is there any radio station I can listen to on the Internet?

No sound on internet radio. I can no longer get any sound from Internet Radio on WMP. The station I usually listen to is 1.fm Otto’s Baroque. Any suggestions? This thread is locked.