Why does my Panasonic TV not turn on?

The power LED blinks ten times. If any of the voltages created on the PA Board is excessive or shorted, the unit goes into shut-down. The power LED blinks ten times. Here is a training manual for the Panasonic 9th gen Plasma TV.

How many times does the power light blink on a Panasonic TV?

The power LED blinks ten times. Here is a training manual for the Panasonic 9th gen Plasma TV. It will show you all the testing points as well as ideas of where to look for the error on your TV. As with any TV, be careful of anything high voltage and watch yourself.

What’s the problem with my Panasonic Viera TV?

I have fixed my problem with my less than 1 year old Panasonic Viera LED TV. It has the red light flashing problem. Turn it off and on will display stuff on screen for a brief moment and then it turns off with the red light flashing every few seconds.

Why is my Blu ray player not playing?

If your Blu-ray Player can’t play a good Blu-ray disc, you need to check the Blu-ray Region code on the disc. For example, all Samsung Blu-ray players purchased in Australia are region locked and can’t be unlocked.

Why does my pioneer HDMI not turn on?

Related issues with HDMI have to do with the quality of the HDMI physical connections. These are mostly at the back of the top HDMI board on most Pioneer units. If you remove the top cover (side and back screws hold it on, then lift the back up, and pull up and out toward the back), you will see the top board.

What should I do if my HDMI light is flashing?

Plug the unit in and with the HDMI light flashing, press the power and the advanced surround button simultaneously and hold this combination for 5 seconds to clear the error. Should this not clear the error, you will have to open up your receiver and see if there is any visual damage. Consider changing the HDMI board.

Where is the HDMI cable on a pioneer TV?

These are mostly at the back of the top HDMI board on most Pioneer units. If you remove the top cover (side and back screws hold it on, then lift the back up, and pull up and out toward the back), you will see the top board. You will see one HDMI cable going frontwards.

Why is my HDMI light not working on my TV?

If your HDMI signals ate noisy or HDMI video fails, I have also had to remove the top board to slightly re-compress the back HDMI surround ground shield. When an outer metal connection jacket gets bent open, the HDMI internal pins may lose good contact.