Why does my Hoover windtunnel make a hissing sound?

We sometimes hear from you guys that your WindTunnel is overheating and shutting off. This can happen when there’s a clog somewhere in the system. On some of the versions of the vacuums, you might hear a whistling or hissing sound when your vacuum is on the verge of shutting off. That’s the system performance indicator.

What to do if your Hoover has no suction?

Empty the recovery (dirty water) tank if you experience low or no suction. A shut-off mechanism will close the suction system down when it is full. Make sure that the cap is secure on the tank when you replace it. Also, check that the tool door is closed, as a poor seal in this area can also affect suction.

How to troubleshoot a Hoover windtunnel power cord?

Turn the power off and unplug the power cord. Remove the dirt cup from the cleaner and flip the lid to open. Then remove the rinsable filter and rinse with water for two minutes or until the water runs clear squeeze out the excess water and allow to dry for at least 24 hours. Never put a wet rinsable filter back into the cleaner.

What should I do if my Hoover filter is not working?

If didn’t work it properly their is could be a clogged filter to check this remove your dirt cup and lift the filter. You have to clean its dust and rinse for one or two minutes under warm water and you’ll have to let it dry for a full day.

Why does my sound bar not pair with my subwoofer?

Note: If there is no sound coming from the wireless subwoofer, or the sound from the subwoofer is low, refer to the no sound comes out of the subwoofer, or the sound is low article. Get Support Content on the Go!

Why do I lose audio after plugging in an HDMI?

Because HDMI is capable of carrying audio, so in case you plugged your system into a TV or receiver, it defaults to sending audio out of the HDMI port. If you wish to override this, while you have a display connected, go to Control Panel > Sound, right-click your regular speakers in the list, and click the “Set default” button.

What should I do if my computer audio is not working?

Windows has a dedicated audio services component that is responsible for playing all kinds of sounds on the system. Therefore, you can just restart the audio services on your system to troubleshoot the computer audio not working. Just go to the Start menu, launch the Run prompt, and enter the “msc” command.