Why does my Denon subwoofer not work in stereo?

You will have to leave the Denon in a stereo set up from the audio settings, think it’s the green button on the remote. If you use Direct or Pure Direct or have the speakers set as large then the sub will not be active from a stereo signal. @zapp brannigan Welcome to the Forum.

Can a Denon 2113avr use a subwoofer?

The manual isn’t clear but it might well be the case that direct mode will not use the sub. It does say that regular stereo (i.e. not direct) mode will output to the sub as well though. Failing that I would guess you will need to connect to a TV and bring up the speaker configuration menu unfortunately. I have a Denon 2113AVR which works well.

Is there a HDMI input for a Denon DVR?

It has proven to be irrelevant to this issue). The Denon AVR unit has no HDMI input, so either the fiber optic or digital coax outputs are utilized to directly transport the DVR’s audio to the AVR’s input, when using DirecTv.

You will have to leave the Denon in a stereo set up from the audio settings, think it’s the green button on the remote. If you use Direct or Pure Direct or have the speakers set as large then the sub will not be active from a stereo signal. @zapp brannigan Welcome to the Forum.

Do you need Denon Remote app for Android?

With the Denon Remote App, your Android device just became an integral part of your home entertainment experience. *1. During fast network browsing, the AVR GUI and Remote App display may be temporarily out of sync. *2. An HDMI connection between the AVR and Blu-ray player is required. HDMI control needs to be set to ON for both units. *3.

Where can I Find my Denon owner’s manual?

When the “product specifications and downloads” page opens, scroll down to the “model downloads” section (Close to the bottom of the page) and select the user guide or any other information you would like to download from the options available. Was this answer helpful?

The manual isn’t clear but it might well be the case that direct mode will not use the sub. It does say that regular stereo (i.e. not direct) mode will output to the sub as well though. Failing that I would guess you will need to connect to a TV and bring up the speaker configuration menu unfortunately. I have a Denon 2113AVR which works well.

Why is the back of my Denon not working?

Denon 1712 issue. Surround Back not working Ok, so…I can’t access the GUI. I know that, right there, takes away a lot of the help choices. I should be able to by tomorrow. So I hooked up my Front L & R & Center + Subwoofer. Played very -noice-. All play fine. So I figured I’d finally hook up my rear Surrounds.

Where does the pop noise come from on my Denon?

First of all, sometimes when coming out of Apple TV+ and Amazon Prime shows/movies that there’s little pop noise coming from my left surround later did extensive test and found that this pop noise is coming from my center , front left also, so, it is not speaker issue. (since my front stage is new I thought it maybe a speaker issue initially).

Can a 5.1 surround sound work on a Denon 1712?

Yes…and no. The surround back speakers are for 7.1. For 5.1, though, you use the rear surround jacks. Well I changed it from Surround back to Surround Right. No audio still. It doesn’t seem right as well.

Why is my Denon not compatible with my Yamaha HDMI?

If the SAME components have no issues with the Yamaha, then it could be that the Denon isn’t as compatible. @M Code said that Yamaha is the only major brand that extensively tests for HDMI compatibility. I’m new to write post here, I have been reading stuff here though.

Can you use a subwoofer without a TV screen?

However, when I plug it into the Denon the subwoofer does not work. The volume is up full on the subwoofer. I am using my Denon as an “audio only” receiver and it is not hooked up to a TV. Can someone tell me how to access “subwoofer volume controls” on the Denon without a TV screen.

Can a subwoofer be set to small under Speaker assign?

Under speaker assign you will have to make sure the subwoofer is marked as being present. Under the manual settings have your speakers set as small. It is actually worth running Audyssey to better integrate the sub into the system.

Where can I get technical support for Denon?

Denon offers in-house troubleshooting and technical support at no charge. Our phone Support team can be reached by calling (201) 762-6665 Monday – Friday, 10:00 AM to 5:00 PM EST. You can also use our Chat Support, which is available M-F, 10 AM to 7 PM EST.

Under speaker assign you will have to make sure the subwoofer is marked as being present. Under the manual settings have your speakers set as small. It is actually worth running Audyssey to better integrate the sub into the system.

Why does my Denon remote not control volume?

The volume works but seems to be a weak connection. You must push the volume buttons several times and hold for a long time for it to work. Quite often it isn’t worth it and I just adjust on the unit. All other buttons function fine. Above answers were helpful in what isn’t the problem!

Why is my audio not working on my TV?

Turn off the TV and the audio system. Turn on the TV first, then turn on the audio system. On your TV speaker settings, set the Digital Audio Output to PCM. If the audio system connected to the TV doesn’t support DTS or Dolby Digital, it may not output sound depending on the type of broadcast or video.

The volume works but seems to be a weak connection. You must push the volume buttons several times and hold for a long time for it to work. Quite often it isn’t worth it and I just adjust on the unit. All other buttons function fine. Above answers were helpful in what isn’t the problem!

Why is my Denon HDMI audio passthrough not working?

Audio passthrough doesn’t work when the avr is in standby mode. If you have Dolby Digital set to ON on the cable box, but your TV cannot accept Dolby Digital audio (many cannot), there will be no audio passed to the TV, rather you would have to set Dolby Digital to OFF on the cable box.

What should I do if my Denon arc is not working?

I reset the Denon and reset the TV. It didn’t help. 2. Procedure using a HDMI cable Connect the HDMI cable from the ARC HDMI input connector on your TV to the ARC HDMI out (Monitor) connector on your AV receiver. Select “TV AUDIO” from the input source select buttons on the remote control or the receiver.

Why does my Denon AVR not work on my TV?

If you have Dolby Digital set to ON on the cable box, but your TV cannot accept Dolby Digital audio (many cannot), there will be no audio passed to the TV, rather you would have to set Dolby Digital to OFF on the cable box. Also, for more helpful information on your new AVR, review posts 3-7 in the 2015 Denon AVR Owner’s thread linked below

Can a Denon be mounted on a aventage?

In their display theyve got a vertical row of Pio Elites, Denons, Marantz, and Yamaha Aventages (in the Magnolia test room). All receivers are mounted exactly the same with the same amount of room in between shelves, open backs and fronts, and the Dennons and Marantz were incredibly hot.

Can a Denon overheat in Eco mode?

With proper ventilation in your own cabinet, the unit should only run warm at best and can actually run 10 degrees F cooler when using ECO mode. I was actually at Best Buy last weekend auditioning B&W CM 10’s, and I noticed the exact same thing.

How do you connect a preamp to an AV receiver?

Plug Your Preamp into the Receiver With all of your audio devices plugged into the preamp, plug the preamp’s Output or Phono Out directly into the AV receiver’s HT Bypass or Direct In. In all likelihood, this will require a pair of RCA cables.