Why does my Denon AVR not work on my TV?

If you have Dolby Digital set to ON on the cable box, but your TV cannot accept Dolby Digital audio (many cannot), there will be no audio passed to the TV, rather you would have to set Dolby Digital to OFF on the cable box. Also, for more helpful information on your new AVR, review posts 3-7 in the 2015 Denon AVR Owner’s thread linked below

Why is my Denon HDMI audio passthrough not working?

Audio passthrough doesn’t work when the avr is in standby mode. If you have Dolby Digital set to ON on the cable box, but your TV cannot accept Dolby Digital audio (many cannot), there will be no audio passed to the TV, rather you would have to set Dolby Digital to OFF on the cable box.

Why is the back of my Denon not working?

Denon 1712 issue. Surround Back not working Ok, so…I can’t access the GUI. I know that, right there, takes away a lot of the help choices. I should be able to by tomorrow. So I hooked up my Front L & R & Center + Subwoofer. Played very -noice-. All play fine. So I figured I’d finally hook up my rear Surrounds.

Is the rear surround on my Denon 1712 working?

I should be able to by tomorrow. So I hooked up my Front L & R & Center + Subwoofer. Played very -noice-. All play fine. So I figured I’d finally hook up my rear Surrounds. Hooked on my Rear Right just to test it out.

Is the Denon AVR 3806 on auto settings?

(I also have the scart direct to the sony on AV1 and the 3806 is connected to the Sony via HDMI to AV6) I don’t know your settings but have you assigned the correct inputs to the right function in the imputs menu? Click to expand… I have definitely got the opt 1, opt 2 settings correct. is on auto ?

Why is my AVR not sending my HDMI signal?

You may be having an HDMI “handshake” issue, so try bypassing the AVR, letting the equipment “see” the TV and then re-route back through the AVR. If none of these things help then trying another TV is a good idea. I hope that this helps; please let us know if you need more help! Good luck! Welcome to HTS!

Can a AV receiver auto switch to arc?

The TV AUDIO SWITCHING setting prevents the receiver auto switching to the ARC source when the AV receiver detects the TV at power up, but you will however need to manually select the TV source if ever wanting to access audio from the TV using ARC.

How to use Denon arc on a TV?

Select “TV AUDIO” from the input source select buttons on the remote control or the receiver. You should now be able to output the TV audio through your AV receiver. Note: To use ARC you must turn on HDMI control in the menu of the receiver, as well as the TV.

What is the HDMI port on Denon av7704?

On the AV7704 the only HDMI port used is port 3 that is labeled Blu-Ray by default. This isn’t a complex system. 3) Hitting CBL/SAT on the AV7704 remote returns from the OPPO to the signal originating from the TV with ARC used for audio.

Can you use banana plugs on Denon AVR?

Return of AM tuner to all models (so all models have AM/FM tuners). 2. Easier to use color coded speaker clips (E200) / speaker posts (E300 and higher) – note that although the new posts on the E300 and E400 will not be able to accept banana plugs, they should be much easier to use bare speaker wire than the speaker posts on previous year’s models.

Can a AV Receiver support arc Return Channel?

This can be done in two different ways: If your AV Receiver supports ARC / Audio Return Channel… Please follow the steps below to identify and solve the problem: 1. Make sure all devices in the…

Why did my Denon AVR E400 not update firmware?

I was in the “firmware” loop and came up with the same Communication Fail 0E as others on my Denon AVR-E400. I was attempting the wireless firmware update and stupid me, shut off the system. Tried the reset and nothing (did read that holding down power, forward source select and zone 2 will reset the wifi back to day 1 but didn’t try it).

What should I do if my Denon arc is not working?

I reset the Denon and reset the TV. It didn’t help. 2. Procedure using a HDMI cable Connect the HDMI cable from the ARC HDMI input connector on your TV to the ARC HDMI out (Monitor) connector on your AV receiver. Select “TV AUDIO” from the input source select buttons on the remote control or the receiver.

Why is my Denon AVR s750h audio cutting out?

Audio returns once the receiver switches back to CBL/SAT input. This is starting to get really annoying. Spectrum DVR box was just swapped out about 1.5 years ago. 2) A less annoying issue, but still an annoyance, the audio sometimes cuts out randomly for just a quick second or so while watching live cable.

What kind of speakers are on a Denon arc?

Speakers are assigned and calibrated. Front speakers are connected to stereo power amplifier for a total of 11 channels and 2 subwoofers . HDMI is connected to ARC HDMI 2 on my LG OLED TV through to my Denon ARC. Simplink is on and set to ARC. However, I can’t get any sound through HDMI.

How do you turn on HDMI on Denon arc?

Note: To use ARC you must turn on HDMI control in the menu of the receiver, as well as the TV. The TV must also have the correct settings to enable audio to be output to the receiver. To turn on HDMI control in the receiver press the SETUP button on the remote, select VIDEO, then HDMI Setup.

Are there any audio issues with new Denon AVR s750h?

I did run all new speaker wires. Previously everything was plugged into the TV and the only audio to the old receiver was the optical connection (no HDMI on old receiver). I did NOT experience these problems until I got the new system all set up. Problems: