Why does my CCTV DVR keep freezing?
Why does my CCTV DVR keep freezing?
When a home CCTV DVR keeps freezing, several reasons could be causing the problem. The most common issues include a corrupted hard drive, incorrect distance between the DVR system and the cameras, power issues or signal interference. A frozen DVR is frustrating.
Why does my DVR keep rebooting?
If the DVR / NVR is rebooting repeatedly, the issue may be caused by insufficient power or a hard disk drive (HDD) error. Check that the correct power adapter is in use and that the DVR / NVR is receiving sufficient power.
Why does my DVR keep rebooting after boot?
Your DVR may have boot failure issue if any of the following happens: LEDs are OFF at the top or front of the DVR. LEDs are ON and Swann loading page shows but reboots after. To isolate the issue, consider following the steps below: Check the red tag – most of the power adapter included has red sticker along the power cable.
How can I tell if my Swann DVR is working?
Check the red tag on the power supply cord. Most of the power adapters that come with the Swann DVR have a red sticker along the power cable. Make sure it’s labelled for use for your DVR (you should see DVR/NVR power supply).
What kind of power adapter do I need for Swann DVR?
Most Swann DVR use 12V 2A/2000mA power adapters. Sometimes the power supply outputs less power and brings the DVR on a booting loop. In this cases you need to buy a new one. Plug to a wall outlet.
What does it mean when a DVR shuts down by itself?
An NVR or DVR that is shutting down or rebooting by itself is a major security red flag in your CCTV security system. Many people have this particular issue: My DVR reboots by itself?
Check the red tag on the power supply cord. Most of the power adapters that come with the Swann DVR have a red sticker along the power cable. Make sure it’s labelled for use for your DVR (you should see DVR/NVR power supply).
Your DVR may have boot failure issue if any of the following happens: LEDs are OFF at the top or front of the DVR. LEDs are ON and Swann loading page shows but reboots after. To isolate the issue, consider following the steps below: Check the red tag – most of the power adapter included has red sticker along the power cable.
Most Swann DVR use 12V 2A/2000mA power adapters. Sometimes the power supply outputs less power and brings the DVR on a booting loop. In this cases you need to buy a new one. Plug to a wall outlet.
An NVR or DVR that is shutting down or rebooting by itself is a major security red flag in your CCTV security system. Many people have this particular issue: My DVR reboots by itself?
