Why do I get an amp error message?

It sounds like AMP error would point to the internal amp on the radio (this is what a Google search shows as the common problem) EDIT: Otherwise it could be an internal short which I would try to get the radio exchanged in that case. Right now I just have no external amp plugged in, and the speakers wired to the radio through my harness adapter.

What happens when an amp goes into protection?

In MANY amplifiers, the power LED will be lit but the amplifier will be completely dead internally. This is especially true when the power supply has failed. There are a few amps (some JL Audio) that will go into protect and none of the indicators change.

What should I do if my amplifier powers up?

It’s important that you disconnect the speaker wires from the speaker terminals of the amplifier and disconnect all RCA cables from the RCA jacks of the amplifier. If the amp powers up after disconnecting the speaker and signal cables from it, try reconnecting the RCA cables.

Why did my pioneer civic get an amp error?

Pioneer headunit AMP ERROR message after 30 seconds of playing? So I finally got around to installing an audio system in my Civic, I’ve got two amps (one two channel, one four channel) mounted under my seats, and a Pioneer head unit I just got from Best Buy a few days ago.

How can I tell if my amp light is blinking?

Easy way to prove it. Pull the amp. Hook it up to your battery in the front with short runs of wire and see if it will stabilize. Most certain it will though. Yea seems like either the fuse isn’t sitting tightly in the holder or there is a loose wire.

Why are there blinking lights on my control panel?

The following sections describe the most common error conditions with combinations of blinking (flashing) lights displayed on the control panel, followed by solutions for each combination. Find the blinking lights pattern you are experiencing, and then follow the steps to resolve the issue.

Why are the lights blinking on my HP printer?

Turn on the printer, if it does not automatically turn on. The printer might go through a warm-up period. The printer lights might flash, and the carriage might move. Wait until the warm-up period finishes and your printer is idle and silent before you continue.

What is the color of the protect light on an amp?

Generally, the power light is green or blue and the protect light is red but on some amps, the protect light is green and the power light is red. Look at the silkscreen on the amplifier to confirm the function of the LEDs Some amplifiers have multiple protect lights.