Where does the preamp cable start on ProMedia?
Where does the preamp cable start on ProMedia?
The speaker wire from the satellite speakers will be loaded into these highlighted inputs. This preamp cable starts at the Control Pod, where it is hardwired (non-removable).
What are the instructions for ProMedia 2 Klipsch Audio Technologies?
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
What kind of audio plug does ProMedia 2.1 use?
Plug stereo mini plug into MP3/Aux jack. Plug stereo mini plug into MP3 player (for example). Since the ProMedia 2.1 has its own internal amplifier, it was designed to use the “line out” connector of the computer. Connection to the speaker level output jack might result in poor sound quality.
How to identify components on ProMedia 2.1 speaker system?
This guide will help you identify which components are which on the ProMedia 2.1 computer speaker systems. This can be helpful knowledge when troubleshooting or discussing the system with a repair center or Product Support agent.
Where is the preamp input plug on ProMedia 2.1?
The other end plugs into the back of the subwoofer where it is labeled “Preamp Input”. This preamp plug has seen two different versions for the ProMedia 2.1 system. If you have an older ProMedia system (serial number starting with 1011400 or 1011409), you will find that the preamp input plug is a circular 6 pin DIN plug.
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
How do I connect DIN plug to ProMedia soundcard?
1. Do not plug in the AC power cord until your computer/audio system is set up. 2. Connect mini plug to PC soundcard from the control satellite preamp. Care should be advised concerning the cables at back of sub. Bumping them could cause damage. 3. Connect the DIN plug to the sub from the control satellite preamp. 4.
Can a stereo mini plug into a ProMedia 2.1?
Plug stereo mini plug into MP3 player (for example). Since the ProMedia 2.1 has its own internal amplifier, it was designed to use the “line out” connector of the computer. Connection to the speaker level output jack might result in poor sound quality. SOFTWARE AND HARDWARE GAIN CONTROLS
