Where can I find the Panasonic sa-ak18 service manual?
Where can I find the Panasonic sa-ak18 service manual?
ORDER NO. MD0004055C3 CD Stereo System SA-AK18 Colour (S)… Silver Type Area (GC)…Asia, Latin America, Africa and Middle Near East (GN)…Oceania TAPE SECTION : AR2 MECHANISM SERIES CD SECTION : RAE0152Z-3 TRAVERSE DECK SERIES Specifications AMPLIFIER SECTION (GC area) AM TUNER SECTION (GC area)
How to disassembly a Panasonic ak18 disc tray?
Disassembly and assembly of the Disc Tray Step 5 Rotate the hexagonal wrench in the direction of arrow (clockwise), and then open the disc tray fully. Step 2 With lifting the claw in the direction of arrow 1, draw the clamp SW P.C.B.
How to clear cassette code on Panasonic ak18?
Cassette Mechanism Test (For error code H01, H02, H03, F01, F02) 1. Press “TAPE, DECK 1/2” to select Deck 2. 2. Load a cassette tape with the erasure prevention tab, remove from left side only and close the cassette holder. 3. F16 ..etc). 9.5. To clear all Error code 1. Press “STOP/TUNE MODE” button for 5 seconds.
What is CD test mode on sa-ak18?
SA-AK18 10 CD Test Mode Function This CD test mode is provided to check CD unit without 10.2. CD Automatically Adjustment connecting to changer loading mechanism. This mode shall result indication operate CD PLAY with CD unit being connected only and CD Automatic Alignment result is shown on FL display. SA-AK18 11.1.3.
ORDER NO. MD0004055C3 CD Stereo System SA-AK18 Colour (S)… Silver Type Area (GC)…Asia, Latin America, Africa and Middle Near East (GN)…Oceania TAPE SECTION : AR2 MECHANISM SERIES CD SECTION : RAE0152Z-3 TRAVERSE DECK SERIES Specifications AMPLIFIER SECTION (GC area) AM TUNER SECTION (GC area)
Disassembly and assembly of the Disc Tray Step 5 Rotate the hexagonal wrench in the direction of arrow (clockwise), and then open the disc tray fully. Step 2 With lifting the claw in the direction of arrow 1, draw the clamp SW P.C.B.
SA-AK18 10 CD Test Mode Function This CD test mode is provided to check CD unit without 10.2. CD Automatically Adjustment connecting to changer loading mechanism. This mode shall result indication operate CD PLAY with CD unit being connected only and CD Automatic Alignment result is shown on FL display. SA-AK18 11.1.3.
What is the mark function on the sa-ak18?
Page 24 SA-AK18 Mark Function Mark Function J_JOG_AB EQ Joy jog A-D detection EEDAT EEPROM data input input EECLK EEPROM chip select output CHG_AD1 (OPEN/CLAMP)Changer Power supply (-30V) switch A-D detection input 1 AVSS Analog Ground (0V) CHG_AD2 (POSITION/BOTTOM) VREF Reference for A-D…
