What happens when you arm your skycontrol panel?

Arming your system activates monitoring of the security sensors* (doors, windows, motion) in order to protect your home from intrusion. If a sensor is triggered when the system is armed, an alarm results and the Monitoring Station contacts you through Vivint Live™, the two-way voice communication on the panel.

What to do when your skycontrol panel goes off?

Press and hold the appropriate Panic, Emergency, or Fire button for at least 2 seconds until the alarm sounds. 2. The panel will send a signal immediately and a Monitoring Station representative will confirm the emergency through Vivint Live, which is the two-way voice communication at the panel.

How can I test my home security system?

To test, the first thing to do is call the monitoring company and tell them to disregard the signals while you test. Then arm the system. One at a time, try each contact and sensor. Check to see if the panel goes into alarm, and then check with the monitoring company to make sure they received the alarm.

How to reset 2GIG go ! control panel installer code?

If you find yourself with an unmonitored 2GIG Go!Control panel and would like to try to gain access, you can try a reset. Some installers will lock out this feature. Do not try this on a monitored system. Loading…

Where do I set the alarm in my house?

How to Set the Alarm. Each alarm system is different to some degree but they all utilize a remote control panel. Typically this panel is located near the front door of the house. To activate it you enter a security code.

What can be connected to an alarm control panel?

Alarm keypads, hardwired alarm devices, wireless receivers, wired expansion modules, programmable relays and alarm sirens can all be connected to the alarm control panel’s circuit board to customize your security system.

Where do I enter the code to activate the alarm?

Typically this panel is located near the front door of the house. To activate it you enter a security code. When entering the home with the alarm activated, you have between 30 and 60 seconds to enter the code and deactivate the alarm system. When Should You Activate Your Alarm?

What’s the best way to avoid setting off an alarm?

This provides an added layer of protection for you and your family while you’re at home. Stay mode activates exterior doors but let’s you move around the home freely without triggering the alarm. Another way to avoid setting off your alarm accidentally is to make sure everyone in your household knows how to use the alarm.