What does Zone bypass mean on alarm system?

Bypass is the term used to describe the ability to deactivate specific zones of the alarm system before arming the system. Bypassing allows for certain areas to be disarmed while the rest of the space is armed. Bypassed zones will not sound an alarm, and reduces the level of security.

How do I bypass my ADT alarm zone?

Bypassing can only be done while the system is turned off.

1. Press the [Bypass] key followed by your [user code] and then the [zone no. (1-8)] to be bypassed.
2. If Quick Bypass is enabled, you need only to press the [Bypass] key and the [zone no]. Bypassed zones are not protected when the system is turned on.

How do I get rid of bypass alarm?

To clear the bypass, if the system is armed, perform a disarm command. This will un-bypass all bypassed zones. If the system is disarmed: select Security > Zones highlight the zones to be un-bypassed and select the “Clear Bypass” button at the bottom of the page. Enter a valid 4 digit user code.

How do you bypass a zone on an alarm system?

Instead of arming/disarming the system, you will press the number “6,” which is the BYPASS button. Enter the zone number you wish to bypass. If the rest of your zones are not faulted, your keypad should be displaying “READY.”

When do I need to bypass the zone?

A bypass will expire as soon as the system is disarmed, meaning you will need to bypass the zone every time you set the system until the fault is cleared. Thus, bypassing is a temporary solution and should only be used until the system can be serviced by a certified EPS Security technician.

How to bypass all faulted zones in Windows 10?

With the system in the disarmed state, from the Home screen select “Security.” Select the “Zones” icon. Selecting the “Bypass All Faulted” button allows you to bypass all faulted Burg zones, if “Force Bypass” is enabled in panel programming. The system displays a keypad.

How to bypass a zone on a vista panel?

To bypass a zone on a Vista panel: The panel must be in the disarmed state, enter the 4 digit security code, followed by the number 6 [Bypass] and the 2 digit zone number to be bypassed (ex: [1234] [6] [04] to bypass zone 04 – always add a 0 in front of a single digit zone number).

How can I bypass a zone on my alarm system?

To bypass a zone on your alarm system: Enter the following: Your 4-digit code The number 6 (bypass button) Two-digit zone number of the zone you want to bypass. (01, 02, 03, etc.) Repeat this process for all zones you would like to bypass.

How can I bypass the Master Alarm Code?

Arm the system as usual. NOTE: After disarming the system, you must repeat this process to setup the bypasses for the next time you arm the system. 1. With the system in the disarmed, select the “Zones” icon. The system will display the list of zones. 2. Select the zone (s) you want to bypass and select “Bypass”. 3. Enter your master alarm code.

With the system in the disarmed state, from the Home screen select “Security.” Select the “Zones” icon. Selecting the “Bypass All Faulted” button allows you to bypass all faulted Burg zones, if “Force Bypass” is enabled in panel programming. The system displays a keypad.

A bypass will expire as soon as the system is disarmed, meaning you will need to bypass the zone every time you set the system until the fault is cleared. Thus, bypassing is a temporary solution and should only be used until the system can be serviced by a certified EPS Security technician.