What does alarm system stay Mean?

When your alarm is in stay mode all the interior zones, such as the motion detectors, will be circumvented. This means the alarm won’t be triggered should you get up in the middle of the night for a glass of water. Conversely, stay will arm exterior doors and windows as well as the glass break detectors.

What is the difference between stay and away for an alarm system?

When armed in the Stay Mode, all zones programmed as an Interior type (Interior Follower, or Interior with Delay, usually motion detectors) will automatically be bypassed. Arming in the Away Mode will not automatically bypass any sensors, and the entire system, including motion sensors will be armed.

What happens when I disarm my security system?

If you disarm the system before the entry delay ends, the alarm sound stops and the message “CANCELLED ALARM” or “CA is displayed on the keypad, along with a zone number indicating the faulted zone. No message is sent to the alarm monitoring company.

What do I need to do to stop an exit alarm?

To stop the alarm, the system must be disarmed (your code plus OFF); to clear the display, enter your code plus OFF a second time. An “exit alarm” also results if an entry/exit door or interior zone is faulted within two minutes after the end of the exit delay.

How can I avoid setting off my ADT alarm accidentally?

Another way to avoid setting off your alarm accidentally is to make sure everyone in your household knows how to use the alarm. Be sure to test your system regularly to make sure it communicates properly with the 24-hour ADT Customer Monitoring Center.

What happens to motion detectors in arm stay mode?

When armed in the Stay Mode, all zones programmed as an Interior type (Interior Follower, or Interior with Delay, usually motion detectors) will automatically be bypassed.

How to arm Ademco by Honeywell home security system?

This video covers the most common ways of arming your ADEMCO by Honeywell home security system. AWAY mode arms all of your interior and perimeter zones. This mode approximately has a 40 second entry delay. STAY mode arms all of your perimeter zones and leaves the interior zones inactive. This mode approximately has a 40 second entry delay.

When to arm and Disarm Your ADT system?

Choose if you’d like to arm your system STAY or AWAY. STAY is used to arm the system with people or pets inside the premises. The perimeter sensors will be armed, however interior sensors will be left unarmed. AWAY is used when no one will remain inside the premises.

How does Stay Mode work on an alarm?

STAY mode arms all of your perimeter zones and leaves the interior zones inactive. This mode approximately has a 40 second entry delay. STAY mode arms all of your perimeter zones and leaves the interior zones inactive. There is no entry delay in STAY mode.

How to remotely arm and Disarm Your System?

To remotely arm or disarm your system, log into the Pulse app and you’ll see a large red or green icon on your dashboard. To arm your system, tap the green icon. Choose if you’d like to arm your system STAY or AWAY. STAY is used to arm the system with people or pets inside the premises.