Is the vsx-522-k a good AV receiver?

Fortunately, Pioneer has another function called Auto Level Control that equalizes the volume automatically. The Pioneer VSX-522-K can be one of the best purchases ever if you fully understand and accept its limitations. There are no network connectivity options to speak of and Bluetooth is usually absent.

What are the specs of a pioneer VSX 522?

HDMI input, HDMI output, SPDIF input, USB, audio line-in, composite video input, headphones, monitor output, rear channel output, speakers output, subwoofer output 19 pin HDMI Type A, 4 pin USB Type A, RCA, RCA x 2, TOSLINK, banana/spade x 2, click-fit x 2, phone stereo 6.3 mm 13.5 in 17.1 in 6.6 in Be respectful, keep it civil and stay on topic.

Can you use a turntable and a receiver at the same time?

You don’t want two phono preamps trying to work together at the same time. If your receiver and turntable both have a built-in phono preamps, and your turntable has a switch that lets you bypass or turn its built-in preamp off, you can experiment to see if either your receiver’s or turntable’s phono preamp sounds better.

How does a phono stage work on a turntable?

This voltage, or music signal, must be properly equalized and amplified before it can play through your receiver. Boosting this signal is the job of the phono preamp, also known as a phono stage, phono EQ, RIAA preamp, or turntable preamp. And just in case you were wondering, “phono” is short for phonograph, the old-fashion term for turntable.

Fortunately, Pioneer has another function called Auto Level Control that equalizes the volume automatically. The Pioneer VSX-522-K can be one of the best purchases ever if you fully understand and accept its limitations. There are no network connectivity options to speak of and Bluetooth is usually absent.

Where is the HDMI port on a pioneer VSX 522?

Also found on the bottom portion is the usual setup mic and phones jacks. The back side of the Pioneer VSX-522-K still remains simple but it has some worthy additions that were previously lacking in the VSX-520-K. There is an additional HDMI port bumping up the total to 4 HDMI inputs along with a single output.

Are there any VSX models that are network ready?

This family consists of 4 consumer models in the VSX series along with 2 high-priced SC models. 5 of the models are network ready except for the Pioneer VSX-522-K. Because of this, the VSX-522-K can appear a bit dated as many companies are trying to make the living room the center of a network-connected home.

Can a pioneer vsx-522-k play over HDMI?

Per the VSX-522-K owner’s manual, page 14, the OSD will only be displayed over an RCA video connection – it will not work over HDMI. That’s pretty inconvenient, but that’s what the manual says. Regarding audio over HDMI, check out page 28 of the manual. You’ll want to make sure that the HDMI audio is set to “AMP” instead of “THRU.”

What to do if your VSX 522 has no sound?

Please first disconnect the receiver from power for 30 seconds and plug it back in. Check for sound again, and if there is still none, then reply back. Still no sound. Myself. Please click on the link below and scroll to page 37 then follow the instructions for “Resetting the Main Unit”.

This family consists of 4 consumer models in the VSX series along with 2 high-priced SC models. 5 of the models are network ready except for the Pioneer VSX-522-K. Because of this, the VSX-522-K can appear a bit dated as many companies are trying to make the living room the center of a network-connected home.