Is the HDMI output on my Onkyo TX nr656 working?

Looking at the back panel, there are two HDMI outputs like you said. I wouldn’t think the Sub output would work since that needs to be set up as a zone (if it’s like the NR656). This receiver doesn’t have Component or Composite Video output so that eliminates using an analog display.

Why does my Onkyo TV say no signal?

The tv says no signal. HELP? hoping someone hear can help me. When you say new Onkyo TX-NR676, do you mean new-new, like the HDMI doesn’t work out of the box, or is this a case of the HDMI output worked for a while, and then died? Does the front panel light up?

Can a subwoofer be added to a stereo system?

Subwoofers from Amazon.com. Bring out the best in your stereo system with the bass of one of these subwoofers. A great addition to any home entertainment center, the subwoofer deepens the sound coming out of your speakers, adding the extra power you want when watching a movie or playing your favorite tunes.

What should I do if my subwoofer is not working?

Once you have the subwoofer calibrated at whatever level the receiver sets for it – but ideally around the -6db mark then try listening to a bit of film. See if it still sounds lacking in bass. If it does try adding +3db on the subwoofer trim. Again, if that is still lacking there is another option to try in the onscreen options menu.

How to connect a subwoofer to a receiver without a speaker?

Example of a powered subwoofer with 2 types of signal inputs (speaker level and RCA jacks) along with sound controls. Note: Not all subwoofers have speaker level inputs, which makes it a problem connecting them to a receiver without a subwoofer output.

What does.1 mean on a subwoofer?

The “.1” is used to represent a sound channel limited to only bass for optional subwoofer use. Example of a powered subwoofer with 2 types of signal inputs (speaker level and RCA jacks) along with sound controls. Note: Not all subwoofers have speaker level inputs, which makes it a problem connecting them to a receiver without a subwoofer output.

How to troubleshoot no sound coming from an Active Subwoofer?

A separate article about the difference between an active subwoofer and a passive subwoofer is available. Select Settings. Select Speaker. Select Speaker SP. Make sure that the Speaker pattern ends in either a .1 or .2. NOTE: If a pattern that ends in .0 is selected, the subwoofer will not work.

What kind of Jack does a subwoofer need?

The subwoofer input jack usually connects to a single mono (monaural, meaning both stereo channels are combined into one) output jack on the receiver. Example of the mono RCA subwoofer output jack found on many home receivers. These connect with a single male to male RCA cable to a powered subwoofer.

How do I get Zone 2 on my Onkyo?

Hook up the output from the HDMI audio splitter, either digital optical or RCA jacks, back to a receiver input. I used an optical cable and chose the digital optical “TV” input on the back of the receiver. Map the input you chose to the component you want to select in Zone 2 to play (in my case, InputOutputAssign->TV to “OPTICAL 2”).

What kind of HDMI cable do I need for Onkyo?

I ended up buying all new HDMI cables ratest at18 gbps Some of mine were 18 gbps and some were not. Onkyo said that was my problem and it fixed my issue. You do not need expensive cables, just 18 gbps rated cables.

Looking at the back panel, there are two HDMI outputs like you said. I wouldn’t think the Sub output would work since that needs to be set up as a zone (if it’s like the NR656). This receiver doesn’t have Component or Composite Video output so that eliminates using an analog display.

Why is there no sound Zone 2 on Onkyo?

Firstly, your AV receiver has no HDMI second zone abilities and its second output is merely a mirror of the main output. This is included in order to make it easier to connect a PJ in a room or setup that also includes a TV. As to why you’re not getting audio in association with certain sources.

The tv says no signal. HELP? hoping someone hear can help me. When you say new Onkyo TX-NR676, do you mean new-new, like the HDMI doesn’t work out of the box, or is this a case of the HDMI output worked for a while, and then died? Does the front panel light up?

I ended up buying all new HDMI cables ratest at18 gbps Some of mine were 18 gbps and some were not. Onkyo said that was my problem and it fixed my issue. You do not need expensive cables, just 18 gbps rated cables.