How to configure a Bosch autodome II PTZ control?

You are now in the Bosch AutoDome II Setup Menu! Navigate to the Bosch AutoDome camera menu option Command Lock: by moving the CM9760-KBD joystick up or down. Navigate to the Bosch AutoDome menu option FastAddress by moving the CM9760-KBD joystick up or down. Note: The Bosch AutoDome will autodetect the new address from the Pelco Matrix Switcher.

Can a PTZ camera be used for remote control?

PTZ cameras with motorized stands which allow for remote control, or even automated operation, have boomed in recent years because they solve a number of issues elegantly. If you’re setting up a conference room, lecture theater or church for remote connection or big-screen display, you probably don’t want to pay a camera operator full time.

How does the Bosch autodome easy II work?

The AutoDome Easy II offers remote addressing via the FastAddress capability from a keyboard that uses an alternative protocol. The FastAddress feature allows you to instal all domes first, then set the addresses via the control system.

What are the dimensions of a PTZ camera?

Resolution: 4K (wide) or 1080P | Zoom/digital: 4x | Frame rate: 30fps at 4K | Field of view: 111 degrees | Size: 123 x 131 x 136 mm | Connectivity: USB, HDMI, Ethernet | Weight: 580g

You are now in the Bosch AutoDome II Setup Menu! Navigate to the Bosch AutoDome camera menu option Command Lock: by moving the CM9760-KBD joystick up or down. Navigate to the Bosch AutoDome menu option FastAddress by moving the CM9760-KBD joystick up or down. Note: The Bosch AutoDome will autodetect the new address from the Pelco Matrix Switcher.

The AutoDome Easy II offers remote addressing via the FastAddress capability from a keyboard that uses an alternative protocol. The FastAddress feature allows you to instal all domes first, then set the addresses via the control system.

Where is the P protocol address on a Bosch camera?

Since it is not necessary to go to the camera’s physical location, this feature makes it easier to readdress cameras at a later time. Program the Bosch camera with a P Protocol address between 1-32 in the Pelco System Manager. For details on this step, view Lessons Learned Article LL#9395 here

What does fastaddress do on a Bosch camera?

The FastAddress feature allows you to instal all domes first, then set the addresses via the control system. Since it is not necessary to go to the camera’s physical location, this feature makes it easier to readdress cameras at a later time. Program the Bosch camera with a P Protocol address between 1-32 in the Pelco System Manager.