How does Yamaha RX V677 Zone 2 work?
How does Yamaha RX V677 Zone 2 work?
To control Zone 2 using the RX-V677 remote, the switch at the upper left side (above the BD/DVD Scene button) of the remote must be set to Zone 2. To see the operations on the front of the Yamaha receiver you must press the Zone Control button on the front of the receiver.
How do I turn off Zone 2?
You can turn on or off the power for zone 2 by the following procedure.
- Select [Settings] – [Zone Settings] from the home menu.
- Select [Power].
- Select [On] or [Off].
Is the Yamaha rx-a720 an AV receiver?
The intelligent amp assign allows plenty of flexibility for the RX-A720. Even though Yamaha markets the Yamaha RX-A720 as a 7.2-channel AV receiver, you can enable the independent Zone 2 so the pair of Surround Back channels can be used to power a separate stereo speaker system located in another room.
How does DSP work on Yamaha rx-a720?
Once you select an input source and a DSP mode, you can assign that configuration to one of the SCENE buttons by simply keeping the button pressed for at least three seconds.
What should I do if my Yamaha receiver won’t connect to WiFi?
A full reset is pretty painful to do unless you can reload your settings from some known-good ones you previously saved (not familiar with your Yamaha model, save the settings you have now regardless, if you can). But I guess it couldn’t hurt to reset, because a warranty repair (if that’s what is eventually needed) would do that anyway.
Why does my Yamaha cx-a5000 not connect to WiFi?
I’ve had a Yamaha CX-A5000 and a RX-V773 that I connect to via wireless. For whatever reason Yamaha lets the receiver pick a new DHCP address whenever it wants to, making it a PITA to connect to it via wireless unless you know the IP address it picked today!
The intelligent amp assign allows plenty of flexibility for the RX-A720. Even though Yamaha markets the Yamaha RX-A720 as a 7.2-channel AV receiver, you can enable the independent Zone 2 so the pair of Surround Back channels can be used to power a separate stereo speaker system located in another room.
Once you select an input source and a DSP mode, you can assign that configuration to one of the SCENE buttons by simply keeping the button pressed for at least three seconds.
Can You Use Zone 2 on a 7.1 surround receiver?
In many surround receivers with zone 2 capability there are two possible issues. First is if you are set up for 7.1 in the main zone so the zone 2 amp is already being used. You would have to add an amp and use the zone 2 line outs for it. Second is that some receivers will not convert digital audio sources into analog for the 2nd zone.
