How does the master control panel 5500 work?
How does the master control panel 5500 work?
An electrical contact connected by a friction clutch was also fitted so the action of turning the wheel also turned the Master Control Panel 5500 on. While the wheel was undoubtedly elegant, its action was marred by a slight delay that made accurate volume adjustment difficult until it was acclimatised to.
Is the master control panel 5500 compatible with the beolink 1000?
This did not mean that the Master Control Panel 5500 could operate any piece of equipment that used the Beolink 1000 terminal, it still required a returned signal from the main system to operate. The reason for the change was so that the Beomaster could be used with other terminals
What are the functions of the MCP 5500?
The MCP 5500 was the updated version of the MCP 5000 and was easily distinguished by the rotary controller which was used primarily for volume control but also had secondary functions enabled allowing treble, bass and balance to be controlled.
What’s the difference between the Beomaster 5000 and 5500?
The Master Control Panel 5500 replaced the Master Control Panel 5000. The need for the change was the introduction of the Beomaster 5500, a new model which, like the MCP, was similar in concept and appearance but quite different in detail . Text copyright © Beocentral. Unauthorised reproduction prohibited .
An electrical contact connected by a friction clutch was also fitted so the action of turning the wheel also turned the Master Control Panel 5500 on. While the wheel was undoubtedly elegant, its action was marred by a slight delay that made accurate volume adjustment difficult until it was acclimatised to.
This did not mean that the Master Control Panel 5500 could operate any piece of equipment that used the Beolink 1000 terminal, it still required a returned signal from the main system to operate. The reason for the change was so that the Beomaster could be used with other terminals
What can be controlled by the beosystem 5500?
It controlled tapes cassettes, records, radio and compact discs and could be operated via Master Control Link. The operating panel MCP 5500 gave you access to the whole of Beosystem 5500. With this at hand, you could remote control all the units of the system and all of its functions.
The MCP 5500 was the updated version of the MCP 5000 and was easily distinguished by the rotary controller which was used primarily for volume control but also had secondary functions enabled allowing treble, bass and balance to be controlled.
