How do you get sound from TV to receiver with optical cable?

Go to Parts and Accessories.

1. Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV.
2. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system.
3. Turn on your TV.

How do you connect an optical wire to a TV?

Securely connect one end of the optical digital cable to the optical out on your TV. Connect the other end to the optical in on your home theater or stereo system. The optical cable works properly if you see a red light on both ends.

How do I connect my Samsung Smart TV to audio cable?

Method 1. Connect with an HDMI cable

1. Prepare an HDMI cable.
2. Connect the cable to the TV’s HDMI IN (ARC).
3. Connect to the HDMI OUT (TV-ARC) port of the soundbar.
4. Turn on the soundbar and set the Source to D.IN.
5. The TV sound will be played through your soundbar.

How to connect external audio using an optical cable?

Step 1. Insert the digital optical audio cable into the DIGITAL AUDIO OUT port of the TV. Step 2. Insert the other end of the digital optical cable into the DIGITAL AUDIO IN port of your external speaker. Step 3. Press the Home button on the remote control and select Settings.

Do you need optical cable to connect sound bar to TV?

Thus, it is a basic and bothers free procedure to connect your soundbar easily. Though, if you have a Bluetooth soundbar, then you might be don’t need any kind of optical cable. But, if your tv soundbars don’t have a Bluetooth option, then the digital audio cable is the thing you need.

How can I hook up a surround sound receiver to my TV?

Need more info. On most surround receivers you have to either use the input setup menu to assign the optical digital input or use a button on the receiver to set the optical input as the one you want to use with the input you are one. Also check the TV audio menu to make sure that the output is compatible with the receiver.

How to connect my Sony TV to my Receiver?

How to Connect My Sony TV to My Receiver 1 Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to… 2 Connect the other end of the cable to the corresponding jacks on the A/V receiver… 3 Power on your TV. 4 Set the TV Audio out setting to either Fixed or Variable . See More….

How do you hook up an optical cable to a TV?

Then, follow the steps below – Enter one side of the Optical Cable to the Optical Digital IN port. Now, connect the cable’s other end to the Optical Digital OUT port. Then, power on your device. If there’s no audio, tune your TV to the input where you have connected the external device.

If there’s no audio, tune your TV to the input where you have connected the external device. Some soundbars need another external device as a medium to get connected with the TV’s speaker system. In that case, you’ll require both Optical Cable and HDMI connections. By this way, you can connect more than one devices to your TV.

How does a smart TV hook up to a receiver?

Simply plug an HDMI cable from the output on the television and run the cable to the back of a receiver. The result carries a digital video and audio signal from the television into the receiver.