How do I Turn on the sound on a 9100?
How do I Turn on the sound on a 9100?
1. Switch on mains supply to panel. The green ‘Power’ LED glows and the internal sounder will sound. 2. Key-in 1234 (user Default Code). Ignore any LEDs at this stage. 3. Key-in 0 + Enter + 7890 (Engineer Default Code). The display clears. 4. Ensure that the panel lid is open. You are now in programming mode. 5.
Is the series 9100 intruder alarm fully programmable?
The Series 9100 Electronic Intruder Alarm System is designed to be fully programmable by the alarm company engineer to suit the particular site requirements and to meet with the individual user needs.
How many users can a scantronic loudspeaker work with?
Any device that complies with the Scantronic plug-on footprint can be fitted. ° Internal sounder loudspeaker output with electronically generated Chime, Alarm and Fire tones. The programming interface is arranged as a set of two-digit numbered commands. The system can provide for up to 4 separate users.
How to do a full reset on a 9100?
1. Key-in 0 + Enter + 7890 (Engineer Default Code). The display clears. 2. Key-in 99 + Enter. The ‘Day’ LED glows. You have now performed an engineer full reset. Re-enter Programming Mode 1. Key in 0 + Enter + 7890. 2. Remove the panel lid. You are now in programming mode. Load Defaults
The Series 9100 Electronic Intruder Alarm System is designed to be fully programmable by the alarm company engineer to suit the particular site requirements and to meet with the individual user needs.
Any device that complies with the Scantronic plug-on footprint can be fitted. ° Internal sounder loudspeaker output with electronically generated Chime, Alarm and Fire tones. The programming interface is arranged as a set of two-digit numbered commands. The system can provide for up to 4 separate users.
1. Switch on mains supply to panel. The green ‘Power’ LED glows and the internal sounder will sound. 2. Key-in 1234 (user Default Code). Ignore any LEDs at this stage. 3. Key-in 0 + Enter + 7890 (Engineer Default Code). The display clears. 4. Ensure that the panel lid is open. You are now in programming mode. 5.
1. Key-in 0 + Enter + 7890 (Engineer Default Code). The display clears. 2. Key-in 99 + Enter. The ‘Day’ LED glows. You have now performed an engineer full reset. Re-enter Programming Mode 1. Key in 0 + Enter + 7890. 2. Remove the panel lid. You are now in programming mode. Load Defaults
