How do I turn on the light on my Lorex camera?

Here’s how to turn on or off the camera LED light.

1. Launch the Lorex Home app, then tap Device Settings.
2. Scroll down and locate the Camera LED.
3. To turn on, toggle the LED button to ON.
4. To turn off, toggle the LED button to OFF.

How do I turn off the light on my Lorex camera?

Here’s how to manually activate or deactivate the Warning LED light.

1. Launch the Lorex Home app, then tap Device Thumbnail to open the Live View.
2. On the Live View, tap the Warning LED light button to manually activate the light.
3. Tap the button for the second time to turn the light OFF.

How do I hide my infrared lights on my security camera?

Place the duct tape directly over the panel on the security camera and press down with your fingers. Place a second piece of duct tape, identical to the first, over the panel. The density of the duct tape will prevent the glow from the IR LED from being seen.

Which is better WDR or BLC?

Backlight Compensation (BLC) brings more clarity to dark areas of an image, particularly when bright light is shining from behind. This is useful when the image is mostly bright. This is useful when the image is mostly dark. Wide Dynamic Range (WDR) brings balanced clarity to both light and dark parts of the image.

Why is my Lorex remote not being detected?

If your remote control is not being detected by the system, try the following troubleshooting tasks. Most Lorex systems come with batteries for the remote control. Make sure the batteries are installed.

What to do if your Lorex doorbell is offline?

The doorbell is offline and does not appear to reconnect. Check if your doorbell is receiving power. Check the LED indicator. If it is flashing blue, then the unit failed to connect to the network. If it is, go to the Lorex Home app and reconnect the doorbell to your network.

Can a Lorex doorbell work on a 5Ghz network?

It does not work with 5GHz networks. The doorbell is not connecting to the Lorex Home app during setup. Please make sure you are using 2.4GHz network or that the doorbell is not too far away from the router. If it is the case, you may have to purchase a network range extender.

Can a Windows 7 Monitor work with a Lorex DVR?

Connect the USB cable to a different USB port on the DVR. If that does not work, power off the monitor / TV and DVR with the USB cable still connected. Power on the monitor / TV first, and then power on the DVR. Monitor is not Windows 7 Touch compatible. Lorex DVR’s are only compatible with touch screen monitors that are Windows 7 Touch compatible.