How do I turn on HDMI CEC on my Yamaha receiver?

You will also need to go to the settings in your AV Receiver and enable CEC & ARC (Audio Return Channel). For the Yamaha AV Receivers, Select “On Screen” then go to “Setup” (Toolbox icon). Go over to HDMI and turn On HDMI Control, after that is complete, press “OK” and make sure “ARC” is set to “On”.

How do I connect my HDMI to my Yamaha receiver?

Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).

Is the Yamaha rxv667 receiver good for TV?

Connected to the television via a Yamaha RXV667 receiver, which has HDMI passthrough and has worked well with all previous equipment to date. All cables are HDMI. I can hear my VouView box, but there’s no video signal at all. Have tested by direct connection to the tv and it’s fine.

What can I do with a Yamaha rx-v477?

Nonetheless, as a hard wired networking receiver, the RX-V477 offers AirPlay and HTC Connect to stream content from iDevices and HTC smartphones; internet streaming services include Pandora and Spotify. Connectivity includes six HDMI inputs and one output with support 4K pass-through (though not at 60p as it doesn’t support HDMI 2.0).

Is there HDMI in the Yamaha rx-v777bt?

Yes, it’s actually there, at least in the top shelf RX-V777BT and the step down RX-V677, but apparently the folks at Yamaha are content to just call it “the latest HDMI version”. If HDMI 2.0 isn’t headlining the show for this release, what are the folks at Yamaha up to?

How to turn on HDMI on a Yamaha receiver?

— Press Settings on remote control. The Appearance menu…appears. — Press OK on remote to select Appearance from left-side. — Scroll down to TV Type on left side and press OK. — Select 1080i HDTV and press OK . — Is the Yamaha receiver configured to accept and output a 1080i or 1080p signal?

Connected to the television via a Yamaha RXV667 receiver, which has HDMI passthrough and has worked well with all previous equipment to date. All cables are HDMI. I can hear my VouView box, but there’s no video signal at all. Have tested by direct connection to the tv and it’s fine.

— Press Settings on remote control. The Appearance menu…appears. — Press OK on remote to select Appearance from left-side. — Scroll down to TV Type on left side and press OK. — Select 1080i HDTV and press OK . — Is the Yamaha receiver configured to accept and output a 1080i or 1080p signal?

Why is the HDMI light on my Yamaha AVR not working?

On my Yamaha AVR the light only comes on when the BD player (HDMI connected) is powered up, and goes off if the BD player is powered off. Since you get that I’d suspect that your HDMI board is still functional, or partly function.

Why does sound come on on my Yamaha receiver?

After shutting everything down and restarting I found that the sound came on as long as the Yamaha receiver was the last component powered up. I can live wih that. Anyway, thanks for everyones help even though it was ssomething I should’ve tried first.