How do I turn off standby on my Onkyo receiver?
How do I turn off standby on my Onkyo receiver?
On the AV receiver, press the [ON/STANDBY] button. [ON/STANDBY] button. The AV receiver comes on, the display lights up, and the STANDBY indicator goes off.
What to do if your Onkyo tx-sr608 standby light blinking?
Check your connections and reconnect if it fires up. Now refer to page 129 of your manual. If the unit does not fire up, press VCR/DVD, while keeping it depressed press the on button. “Clear” should appear in the screen.
What happens when you turn on Onkyo protect mode?
When the device goes into protect mode, the unit will shut down, and the standby light will blink continually. This prevents the fuse from blowing. If your fuse were to blow and the device continued to run the amp could become damaged. Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour.
Why does my Onkyo standby light keep blinking?
First disconnect all the speakers. See if the unit will fire up after disconnecting it from the power for 1 hour or more. If it does you have a short in your speaker wiring. Check your connections and reconnect if it fires up. Now refer to page 129 of your manual.
How can I Fix my Onkyo protect speaker?
Reconnect the power cord after at least one hour has passed. Leave the speaker and audio cables disconnected. Turn the receiver on and turn the volume to the maximum setting. Leave the receiver on for 30 seconds. If the receiver shuts off and goes back into protect mode you will need to contact your Onkyo dealer.
Check your connections and reconnect if it fires up. Now refer to page 129 of your manual. If the unit does not fire up, press VCR/DVD, while keeping it depressed press the on button. “Clear” should appear in the screen.
When the device goes into protect mode, the unit will shut down, and the standby light will blink continually. This prevents the fuse from blowing. If your fuse were to blow and the device continued to run the amp could become damaged. Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour.
First disconnect all the speakers. See if the unit will fire up after disconnecting it from the power for 1 hour or more. If it does you have a short in your speaker wiring. Check your connections and reconnect if it fires up. Now refer to page 129 of your manual.
Reconnect the power cord after at least one hour has passed. Leave the speaker and audio cables disconnected. Turn the receiver on and turn the volume to the maximum setting. Leave the receiver on for 30 seconds. If the receiver shuts off and goes back into protect mode you will need to contact your Onkyo dealer.
