How do I setup my KKMoon IP camera?

Plug & Play, 99% penetration rate, Easy to setup: 1, connect the network cable and power adapter. 2, install APP, scan UID code to add camera. 3, Click online camera to view the camera. UID scan technology applied, easy to operate, and highly confidential.

How to recover a password from a DVR?

Here are the ways you can recover from a lost password. 1 Use the DVR factory default password (like admin, password or 123456) 2 Use a DVR password generator 3 Update the firmware and reset the DVR 4 Reset the DVR by removing the battery 5 DVR motherboard reset with jumpers

Why is there no video on my DVR?

If you try to access recorded video surveillance footage and you cannot find any video in the history or playback section of your DVR. When DVR’s boot-up there is a “test” phase that they run through to check for any errors prior to going into the programmed recording mode.

What to do if you lost your h 264 DVR password?

If you are unlucky and lost the password for a generic H 264 DVR, I will list some ways to get around the problem, check which one may work for you. Here are the ways you can recover from a lost password. 1. Use the DVR factory default password 2. Use a DVR password generator 3. Update the firmware and reset the DVR 4.

How to determine if your CCTV DVR hard drive hard failed?

CCTV Camera Pros created this page to show customers the steps taken when determining if a hard drive failure has occurred on iDVR-PRO surveillance DVRs. These same steps can be used for iDVR-E and other brand security camera DVRs as well. Here are a few examples of situations that may indicate your hard drive has failed.

How to get the factory password for a DVR?

1 Use the DVR factory default password (like admin, password or 123456) 2 Use a DVR password generator 3 Update the firmware and reset the DVR 4 Reset the DVR by removing the battery 5 DVR motherboard reset with jumpers

Can a master password be reset on a DVR?

Basically, if you remove the battery from the motherboard, the clock on the system will be reset and you can use a known master password to access the Dahua DVR/NVR. Remove the battery and wait a little bit (usually 2 minutes) to have the DVR’s clock reset.

How to reset the password on H.264 DVR ( TVT )?

How to reset the password on H.264 DVR or TVT DVR. Step 1. Go directly to the TV/monitor connected to your H.264 DVR and bring up the login screen. Note: you need to use the monitor to reset the password, it won’t work if you try to reset remotely (or locally) through the web browser. Step 2.

How to reset admin password for Dahua DVR / NVR?

Basically, to reset a Dahua DVR/NVR and recover the admin password, you just need to either use a reset button located on the motherboard, try a default password or use a software to generate a new password based on the device date.