How do I set up email notifications on my ZOSI DVR?

Zosi email alert setup (Quick and easy)

1. Your Zosi DVR or NVR can send you emails just like the one below:
2. Right-click the DVR/NVR main screen and click “Main Menu”
3. Click the “Network Button”
4. Click the “Email button”
5. Fill all the information for the SMTP server.
6. Click the “Test Button” and check if it works.

How do I set up email alerts on my DVR?

If you have direct access to your DVR and would like to set up email alerts, log into your device, and in the Settings menu click on Network. In the network menu, click on the Email tab. Make sure to click on the Enable checkbox to enable email alerts to be sent.

What is the default password for ZOSI DVR?

If you have purchased a Zosi CCTV security system and you’re wondering what the default admin password is, here’s the answer: for the old recorders the username is admin and the password is blank (empty). For the newer Zosi DVRs or NVRs, there’s no default password for the admin account.

What is DST setting in DVR?

The DST function allows you to configure your DVR to automatically ad- just its time for Daylight Savings in your time zone. You can set when daylight saving time starts and ends. Enable DST: Click the checkbox if you would like the DVR to adjust the time when Daylight Savings time begins.

How do I turn on Zosi DVR?

8. Powering the DVR On

1. Connect the DVR Power Adapter (12V/2A power adapter) to the DVR.
2. Plug the DVR Power Adapter into a surge protector or wall outlet.
3. Your Zosi DVR will automatically power on.
4. notifying you that it has been successfully powered on.
5. Please allow the DVR a moment to boot up.

How do I reset my password on my Zosi DVR?

If you want to reset a Zosi DVR, read the article: Zosi DVR password reset. To reset the admin password, in the login screen that says “Username/Password Is Incorrect” just press the left and right mouse button alternatively six times and a window should pop up asking you if you want to restore the password.

How do I change my ZOSI DVR password?

Can you use Zosi DVR to send email?

The setup is the same for Zosi DVRs or NVRs it works either way. You just need to enable the email alert feature and configure the SMTP server that works for you. Don’t worry, the configuration is very easy. Here I show how to set up A Zosi NVR to send email using my Gmail account.

How to set up email notifications-DVR operation?

Receive Address: When an email alert is triggered, your Zosi DVR will send emails to these specified addresses. Please be advised that there is a maximum of three email addresses. Test: Use this button to test your settings, and ensure that email notification is set up.

How do I check my email in Zosi?

Right-click the NVR screen and click ” Main Menu ” 2. Click the ” Network Button ” 3. Click the ” Email button ” on the left top 4. Fill all the information (discussed previously) 5. Click the ” Test Button ” and check if it works. 6. Open your email box and check the email As you can see, I got the test email from the NVR.

How to set up motion detection on Zosi?

As you can see in the picture, it’s possible to select the area you want to have the motion detection enabled (blue squares) and adjust the sensitivity. In this example the sensitivity is set to 6 (see the menu at the botton) and it’s also possible to see an icon that shows that the motion was detected (top left).

The setup is the same for Zosi DVRs or NVRs it works either way. You just need to enable the email alert feature and configure the SMTP server that works for you. Don’t worry, the configuration is very easy. Here I show how to set up A Zosi NVR to send email using my Gmail account.

Receive Address: When an email alert is triggered, your Zosi DVR will send emails to these specified addresses. Please be advised that there is a maximum of three email addresses. Test: Use this button to test your settings, and ensure that email notification is set up.

What should the sensitivity be on Zosi email?

In this example the sensitivity is set to 6 (see the menu at the botton) and it’s also possible to see an icon that shows that the motion was detected (top left). The next step is to check your email inbox and see if you got the email…

As you can see in the picture, it’s possible to select the area you want to have the motion detection enabled (blue squares) and adjust the sensitivity. In this example the sensitivity is set to 6 (see the menu at the botton) and it’s also possible to see an icon that shows that the motion was detected (top left).