How do I reset my woofer?

Press and hold the Power button while pressing the Input button and the VOL- button (at the same time). When RESET appears on the front panel display, release the buttons. Unplug the power cord for 30 seconds.

How do I Turn Off the subwoofer on my sound bar?

While the subwoofer is turned off, press and hold the right button on the soundbar’s remote for more than 10 seconds. Confirm the subwoofer is in range of the soundbar.

What to do if your sound bar is not working?

If you are getting no audio at all, do the following: Check the volume: Ensure the volume on the soundbar isn’t muted. Also, turn it up, if necessary. Assess the audio settings: Check whether your external device’s setting is set up to produce audio through a soundbar.

How can I tell if my subwoofer is turned off?

First, make sure the subwoofer is turned off. Then, press the Sound Control button once (it looks like a gear), and then press and hold the same button for 20-30 seconds. Check the numbers that follow the letter “B” on the soundbar. For example, the firmware version may be “B 1008.0.

Why does sound drop out of my soundbar?

Check all sources connected to the soundbar. Make sure the issue is with the subwoofer and not the device you’re listening to. For instance, if the sound only drops out when you are watching a Blu-ray, then the issue is with the connections or the Blu-ray player, not the subwoofer. Reset the power on the subwoofer and try again.

What to do if your sound bar won’t turn on?

[Solution] Sony Soundbar not Turning on 1 HT-S100FOn the soundbar, press and hold the + (volume), (power), and (input) buttons for more than five seconds. 2 On the soundbar, press and hold the + (volume), (power), and (input) buttons for more than five seconds. 3 HT-S200FOn the soundbar, press and hold the – (volume), and (power)… See More….

How can I connect my subwoofer to my sound bar?

While the soundbar is turned off, press and hold MUTE on the remote control. Continue holding until ID SET appears on the soundbar’s display. After that the unit should be connected. Be sure to click ” ✓ Accept as Solution” when you find an answer that works for you.

What to do when your subwoofer won’t turn on?

Press the ID Set button on the back of the subwoofer with a small pointed object, such as a paper clip. If the LINK light starts blinking, try connecting the subwoofer to your soundbar. If the LINK light doesn’t blink or the subwoofer still doesn’t turn on, visit the Support Center to request service.

Why does my sound bar not work with HDMI?

Enable the Control for HDMI function to resolve the issue. On the remote control, press and hold the VOICE button for five seconds. Make sure that the USB indicator on the soundbar flashes twice. If the USB indicator flashes only once, the Control for HDMI function is set to off. If the steps above don’t work, reset the soundbar.