How do I reset my Vivotek camera?

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the Network Camera to reboot. Restore: Press and hold the recessed reset button until the status LED rapidly blinks red and green simultaneously. Note that all settings will be restored to factory default.

Are Vivotek cameras good?

The camera delivers impressive image quality, due to its high-quality optics and image sensor. The picture is sharp and well-saturated, with good dynamic range. In low light, the image becomes rather noisy, so adequate lighting should be used in order to avoid this.

How do you focus a Vivotek camera?

Snapshot Focus Can Greatly Help By pressing the right and left arrows on their keyboard, they may then cycle backward or forward through the short clip, pausing as the quickly moving objects appear in the center of the focus window.

What is the default IP address for Vivotek camera?

192.168.0.3
In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168. 0.3, please forward the following ports for the Network Camera on the router. If you have changed the port numbers on the Network page, please open the ports accordingly on your router.

Where are Vivotek cameras manufactured?

Taiwan
VIVOTEK INC., established in 2000, Taiwan, has quickly taken its place as a leading manufacturer in IP surveillance industry.

Is vivotek a Chinese company?

VIVOTEK INC., established in Taiwan in 2000, is a leading manufacturer in the network video surveillance industry. In 2006, VIVOTEK (TAIEX: 3454) was listed on the Taiwan Stock Exchange. VIVOTEK, with its R&D strength, has developed video codec technology, networking protocol and multimedia SoC.

What is remote focus?

Remote focus is a feature found in camera software that allows you to focus the camera lens without physically adjusting the camera in person. This ability to remotely focus the camera without physically being there makes it easier and quicker to focus your camera for clear, detailed video.

What is the default password for AXIS Camera?

Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.

What security camera is not made in China?

SpotCam Pano Wireless Home Security Camera 1080P, 180-degree Panoramic View, Night Vision, Two-Way Talk, Motion Sound Alert, Alarm Siren, Free Fulltime Continuous Cloud Recording, NOT Made in China.

Where is vivotek made?

Founded in Taiwan in 2000, Vivotek has established itself as a leading manufacturer in the network IP video surveillance industry.

What can a vivotek camera be used for?

A Vivotek camera can also be used to monitor the cash register at your place of business or store data that can be used in investigations. Using cameras along with their other transmission and data organization products will allow you to build up a custom security system specific to your property and your needs.

What kind of intellectual property does vivotek have?

VIVOTEK has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents or pending patent applications in the Taiwan, United Sates and other countries.

Why does my DVR not take a picture?

Sometimes the camera video flickers, shows a lined screen and monitor, or the DVR gets no picture or signal from the camera. As you can see there are a lot of potential issues that can surface in the operation of your system. Let’s take a look at top offenders. Let’s be clear. This is different than a power outage.

Why does my security camera keep losing video?

Video loss or weak video signal on security cameras on a wireless network segment could be caused by unstable network connections, a weak WiFi connection or low internet bandwidth. Here are some reasons why: The camera(s) are too far away from the home router; There are too many physical barriers between your camera and the router