How do I reactivate my DIRECTV receiver?

Heads up: You can also call the automated activation line at 800.388….Replace equipment and activate online

1. Go to your Equipment page.
2. Under Receivers, select Activate receiver.
3. Follow the prompts to activate.
4. Select Continue to complete.

What can I do with my old DIRECTV receivers?

Where to take your equipment

• FedEx Office® Pack and Ship or The UPS Store® will send your equipment back to us at no charge to you.
• You’ll get a receipt that confirms your return, and we’ll know that your equipment is on its way.

  How do I reset my DIRECTV remote control?

  If that didn’t help, try resetting the remote to its default factory settings:

  1. Press and hold MUTE and SELECT together until the light flashes three times.
  2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

  How do I know if my DIRECTV receiver is working?

  Test your electrical outlet

  1. Unplug your receiver and plug in another appliance that works (for example, a lamp). If the appliance works, then the problem is with your receiver.
  2. If your appliance doesn’t turn on, try resetting the outlet.
  3. Plug your receiver into a working outlet to see if it turns on.

  What happens if I reset my DIRECTV receiver?

  This will reset a bunch of the default settings on your DVR but attempt to keep your recordings. This erases all your recordings, all your settings, and puts your receiver or DVR in the state it was when you got it. We recommend this option before sending a defective or unwanted device back to DIRECTV.

  How long should I Leave my satellite receiver Unplugged?

  Leave it unplugged for 30 seconds, then plug it back in. The receiver should boot up properly in less than 90 seconds, with lights flashing in front. Note: Rebooting your satellite receiver may cause a loss of your Guide data for up to an hour.

  Why do I have to refresh my spectrum receiver?

  Then, you will see “Please Wait While We Set Things Up for You,” or “Limited Mode.” In case you don’t see any picture, it’s a sign you must refresh the receiver. This can be done online or via the My Spectrum App. How to Refresh Your Equipment?

  What should I do if my satellite receiver is not working?

  Unplug the power cord from the back of the receiver. Leave it unplugged for 30 seconds, then plug it back in. The receiver should boot up properly in less than 90 seconds, with lights flashing in front. Note: Rebooting your satellite receiver may cause a loss of your Guide data for up to an hour.

  What to do if your DirecTV receiver is not working?

  Press and hold the blue DIRECTV power button on the front of your receiver. Release after twenty seconds. If you’re still having trouble, try refreshing your service. Go to My Equipment & Features and select Refresh my service. A brief service interruption occurs as the service reboots.