How do I get my soundbar to work on my Insignia TV?

1. Step 1: Place the soundbar in front of the TV. First, put the soundbar in front of the TV.
2. Step 2: Connect the optical cable to the TV.
3. Step 3: Connect the optical cable to the soundbar.
4. Step 4: Plug in the soundbar.
5. Step 5: Turn down TV speakers.
6. Step 6: Set TV audio output to PCM.
7. Step 7: Using the remote.

Where is the audio output on my Insignia TV?

Look at the back side of the Insignia TV. There is one audio output located towards the bottom of all the connection ports.

Does Insignia TV have audio output?

Does Insignia TV have a reset button?

Locate the “Power” button on the front of the TV. Press and hold the “Power” button on the front of the TV. Hold down the button for longer than five seconds, then release.

How to setup an insignia ns-sb314 sound bar?

Setting up an Insignia NS-SB314 soundbar (and other brands too) Step 1: Place the soundbar in front of the TV. First, put the soundbar in front of the TV. Easy enough. Step 2: Connect the optical cable to the TV. As you can see in the picture above, the optical cable connector is shaped so it only …

Where is the mute button on an insignia sound bar?

Bass adjustment is directly below, and volume is to the right. Mute button is directly above the volume. No optical connection? The soundbar comes with stereo RCA cables that can be connected to the audio output of your TV or cable/satellite set-top box. You will get better results from optical, though.

Where is the source 1 optical on an insignia soundbar?

It does not require special decoding like Dolby Digital or DTS formats. Turn on the soundbar, then select the input using the remote or the buttons on the top. It is SOURCE 1 OPTICAL on the left, under the red power button.

Why does my sound bar make strange noises?

Fixing strange noises when using optical. You can experience strange noises from your soundbar when the signal from your TV or set top box is incompatible with your soundbar. You need to change a setting on your output device (TV or set top box). To do this follow the below steps: Locate the Sound or Audio settings on your TV and/or other devices.

Setting up an Insignia NS-SB314 soundbar (and other brands too) Step 1: Place the soundbar in front of the TV. First, put the soundbar in front of the TV. Easy enough. Step 2: Connect the optical cable to the TV. As you can see in the picture above, the optical cable connector is shaped so it only

Bass adjustment is directly below, and volume is to the right. Mute button is directly above the volume. No optical connection? The soundbar comes with stereo RCA cables that can be connected to the audio output of your TV or cable/satellite set-top box. You will get better results from optical, though.

How can I get sound on my insignia TV?

It shows how to adjust (and check) the audio settings. If the settings indicate that there should be audio coming from the TV and there isn’t, connect a pair of headphones to the TV’s headphone socket (audio out socket on back of TV) and listen for audio there.

It does not require special decoding like Dolby Digital or DTS formats. Turn on the soundbar, then select the input using the remote or the buttons on the top. It is SOURCE 1 OPTICAL on the left, under the red power button.