How do I fix my DVR hard drive not detected?
How do I fix my DVR hard drive not detected?
Unplug the DVR from power, unscrew the necessary screws, and remove the casing of the DVR. Unplug the 2 cables from the back of the HDD, and check that all the pins are intact and not broken or bent. Check that the jumper settings on the hard-drive (located between the 2 cables) are set to MASTER.
Can a Windows 7 Monitor work with a Lorex DVR?
Connect the USB cable to a different USB port on the DVR. If that does not work, power off the monitor/TV and DVR with the USB cable connected. Power on the monitor/TV first, and then power on the DVR. Monitor is not Windows 7 Touch compatible. Lorex DVR’s are only compatible with touch screen monitors that are Windows 7 Touch compatible.
What are the features of a Lorex night vision camera?
Color Night Vision (CNV) is an innovative night vision technology integrated in select Lorex cameras. Cameras with CNV have special low-light image sensors which allow the camera to continue providing a color image in low-light conditions. Some features of CNV cameras include:
Why does my eco series DVR keep rebooting?
After a power outage, ECO Series DVR’s may reboot on a constant or random basis or may have one of the following issues: Intermittent/unstable remote access. If you do manage to connect, the page is blank. HDD activity LED is no longer flashing. No menu access – mouse, remote, or front panel controls do not respond.
Why is the activity light blinking on my DVR?
The HDD activity LED will start blinking if continuous recording is enabled. IMPORTANT: Make sure your DVR is running the latest firmware. Check the the Downloads tab for your DVR series to locate the latest firmware for your model.
After a power outage, ECO Series DVR’s may reboot on a constant or random basis or may have one of the following issues: Intermittent/unstable remote access. If you do manage to connect, the page is blank. HDD activity LED is no longer flashing. No menu access – mouse, remote, or front panel controls do not respond.
Connect the USB cable to a different USB port on the DVR. If that does not work, power off the monitor/TV and DVR with the USB cable connected. Power on the monitor/TV first, and then power on the DVR. Monitor is not Windows 7 Touch compatible. Lorex DVR’s are only compatible with touch screen monitors that are Windows 7 Touch compatible.
Why is the activity light not flashing on my DVR?
HDD activity LED is no longer flashing. No menu access – mouse, remote, or front panel controls do not respond. NOTE: Formatting the hard drive will erase all data stored on the drive. If possible, it is recommended to backup any critical video before performing the steps below. Power off the DVR. Disconnect all the cameras from the DVR.
