How do I connect my TV to my surround sound system?

Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.

How do you run surround sound wires?

The essential steps to running surround sound speaker wires using this method:

1. Plan your cable route.
2. Once you know which way you’ll be going, locate the wall cavity behind your AV gear.
3. Cut out a single-gang low voltage box hole in the wall behind your AV gear.
4. Remember that you’re connecting the dots—that’s all.

How do you hide surround sound wires?

Best Ways to Hide Speaker Wire and Audio Cables

1. Use existing room décor.
2. Use cable clips with integrated nails to affix speaker cables to the baseboards in the room.
3. Take advantage of light strips.
4. Route the cables under throw rugs or even the carpet in the room.
5. Stick speaker wire to the wall.

How do you hook up a surround sound system to a TV?

Connecting the Speakers Place your receiver near your TV. The receiver must be close enough to both the TV and a power source that you can adequately plug it into both. Examine how your speakers connect. Most surround sound systems have ports for each speaker that you simply plug the appropriate connector into.

Where do you place the speakers in a surround sound system?

Raise the surround channel speakers. Your surround speakers should be placed about two feet above ear level and angled down slightly so that they point at the audience. If you are setting up a 5.1 system, you are done with speaker placement and can proceed to the next part.

What do you need for a surround sound system?

To set up a surround sound system, you will need an AV (audio/video) receiver. This device allows you to hook up and control multiple speakers. It then processes, separates, and amplifies your audio to drive your speakers.

What do I need to connect my speakers to my computer?

Know Your Speaker System. Generally in systems all the cables from the speakers are connected to the subwoofer which comes with a set of wires to connect, that includes : a power cord to connect the system to the AC outlet, a power connector to feed the subwoofer and the subwoofer wires.

How do you hook up surround sound system?

Connect an A/V or HDMI cable to the “Out” port on your DVD, Blu-ray player, or cable box, whichever you wish to connect to the surround sound. Most surround sound receivers have several input slots. Run the other end of the cable to the surround sound receiver.

How do you hook surround sound to TV?

Run the A/V or HDMI cable to your surround sound system’s receiver box. Plug the cable into the “Audio In” port, matching the white plug to the white port and the red plug to the red port. Power on your television and surround sound system. Flip through your surround sound system’s input modes until you find your television’s audio.

How do you connect a home theater system?

There are two ways to connect your TV to a Home Theater System (HTS): 1 With an Analog Stereo to mini stereo (3.5mm to RCA). 2 With a Digital Optical Cable. 1 To connect analog stereo cables from your TV to a HTS follow these steps: 2 Using the analog stereo cables, connect the mini stereo (3.5mm) plug to the AUDIO OUT on your TV.

How do I connect computer speakers?

Connecting Wired Computer Speakers Choose a set of computer speakers. Arrange the speakers in your workspace. Turn the speaker volume to the minimum. Adjust the volume on your laptop to about 75%. Plug the connector into the laptop. Turn the speakers on. Play some audio on your laptop.