How do I connect my Sharper Image wireless speaker?

Press and hold (about 5 seconds) the PAIRING button on the bottom of the receiver until the ON/ OFF indicator starts blinking. Pairing period is approximately 20 seconds. 3. Press and hold (about 3 seconds) the PAIRING button on the back of the base until the power indicator starts blinking.

How do I connect my Sharper Image to Bluetooth?

Long press the [ ] button to turn the speaker ON. The speaker will automatically enter Blue- tooth pairing mode and the LED indicator light will flash BLUE quickly. 3. Check that YOUR device’s Bluetooth feature is turned ON.

How do I connect my Sharper Image Speaker to my TV?

Plug the 3.5mm mini plug into the headphone jack of your TV. Plug the red and white RCA plugs into the Audio In jacks of your Transmitter Base. (Red=right, White=left) TIP: In most cases, if you connect the transmitter base to the headphone jack, the speakers on your television will automatically be muted.

How do you pair a sharper image?

Pairing the Earbuds Power the earbuds ON by removing them from the charging case or by pressing and holding the [Multi] button. After a moment, a voice will be heard, indicating that the 2 earbuds are connected to each other. One earbud will flash RED and BLUE, the other will intermittently flash BLUE.

How do I turn on my Sharper Image shower speaker?

KEY FUNCTION

1. Hold the power button for 3 seconds to switch speaker. on and off.
2. Short press for multi-color LED light: • Rotate colors. • Select color. • No color/light. • Long press to play the previous song. • Short press to turn down the volume. • Long press to play the next song. • Short press to turn up the volume.

How do I charge my Sharper Image Speaker?

The Charging Station With Wireless Speakers makes it easy to charge a mobile phone and a tablet at the same time while playing music wirelessly via Bluetooth. Simply plug the original USB cables provided with your phone and tablet into the corresponding ports on the back of the dock to charge your device.

How do I install wireless speakers?

How to Connect Wireless Speakers

1. Place the wireless speaker’s transmitter next to the audio device you want to connect it to, such as a stereo, television or other audio device.
2. Plug one end of a white composite audio cable into the “Audio Out – Left” or “Aux Out – Left” jack on the back of the audio device.

How do I add wireless speakers to my computer?

There are several ways to connect a wireless system, but USB systems are easiest.

1. Plug the USB transmitter into any USB port on your computer.
2. Install the drivers and/or software necessary for the wireless speaker system.
3. Connect the receiver to your stereo.

How do I connect my Sharper Image headphones to my Iphone?

While powered off, press and hold the power button for about 3 seconds until the Bluetooth LED flashes blue. The prompt voice will say “Pairing”, now the headphone is on pairing mode and ready to connect with your Bluetooth enabled device.

How do I connect my Sharper Image earbuds to my Iphone?

Pairing the Earbuds Enable Bluetooth on your device and go to your device’s Bluetooth menu, Select STBT303 when it appears. Once successfully paired to your device, a voice will be heard and both earbuds will intermittently flash BLUE.