How do I connect my Sharp Aquos TV to my amp?

Connecting Speakers via Optical Digital

1. Unplug your TV and your audio device, like a receiver or a soundbar, from the wall outlet.
2. Insert one end of an optical digital cable into the “Digital Audio Output” located near the bottom edge of the TV’s back panel on its right side.

How do I get my TV to play sound through my amp?

Locate the analog or digital audio output jack on the television. For analog, the output is often labeled AUDIO OUT and could be two RCA jacks or a single 3.5 mm mini-jack. For digital sound, locate the optical digital output or HDMI OUT port. Locate an unused analog audio input on your stereo receiver or amplifier.

Why is my Sony amplifier not working?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

How do I connect my Sony soundbar to my Sharp Aquos TV?

All you need is the red/white audio out to the 1/8″ input on your soundbar. Then, turn off your TV speakers in your TV’s audio menu, and your soundbar will work with everything. Right now the sound bar is hooked up to the TV via a digital optical audio cable.

How do I hook up my Sharp Aquos TV to my surround sound?

How to Connect External Speakers to a Sharp AQUOS

1. Locate the audio output on the back of your television.
2. Plug one end of your powered speakers’ input cable into the television’s audio output.
3. Position your speaker(s) by your television.
4. Connect the other end of the speaker’s input cable to the jack on the speakers.

Does Sharp Aquos TV have optical output?

The Sharp seems to not allow for optical output with an HDMI input to run simultaneously.

Why is my Sony TV not making sound?

Check the Speakers setting on the TV. Make sure TV Speakers is selected. Increase the volume of the TV. A power reset or restart of the TV is recommended step and may resolve the sound issue.

How do I connect my soundbar to my Sharp Aquos TV?

How to change the sound on a Sony TV?

How to Change Sound on Sony TV 1 On the remote control, press the HOME button. 2 Select Settings. 3 The next steps depend on your TV menu options:Select Display & Sound → Audio output → Speakers → Audio system.Select… 4 Select Display & Sound → Audio output → Speakers → Audio system. 5 Select Sound → Speakers → Audio system. See More….

How to troubleshoot if there is no sound or…?

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

Why is my audio not working on my Sony TV?

NOTE: Third-party devices may cause the Control for HDMI function of the TV and the audio device to quit working. It is possible to perform a Clear Data or Cache from External Input Services Application on Sony’s Android TV. For Sony’s Android TVs manufactured in 2015 (W75C, W80C, W85C, S80C, X80C, X83C, X85C, X90C, X93C and X94C).

Why is there no sound coming from my AV receiver?

If still sound is not heard after adjusting all these settings, set the Input Mode of the AV receiver to Auto. There is no sound or audio through the speakers when watching television programming . No digital audio when connected with an optical or digital coax cable .

Why does my Sharp Aquos have no sound?

The problem for me was two fold. 1. Open the Menu. Go to Initial Setup, Input Settings, Output select. Set Output select to “fixed”. If it is set to variable, the audio menus are greyed out. 2. Go to Audio Settings. Under the Treble, Bass etc settings is Auto Volume – set this to “off”

Check that there are no headphones connected. Check if the issue also occurs to other device connected to the TV. You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables.

Why is my audio not working on my TV?

Turn off the TV and the audio system. Turn on the TV first, then turn on the audio system. On your TV speaker settings, set the Digital Audio Output to PCM. If the audio system connected to the TV doesn’t support DTS or Dolby Digital, it may not output sound depending on the type of broadcast or video.

What to do when there is no sound on your TV?

IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio. If not, the audio will be very difficult to hear using a Surround Sound setting. Set Surround Sound to OFF when playing a source that is not encoded with a Surround Sound signal. Check each speaker to make sure they are properly connected to the A/V receiver.