How do I connect my JBL soundbar to my Samsung TV?

Turn on the external device and the soundbar. Press the Source button on the soundbar until “HDMI” appears on the display. Turn the TV on and change its source to the HDMI port where the soundbar is connected. Your TV will display images from the external device, and audio will play from the soundbar.

How do I set up my JBL soundbar?

1 Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on your soundbar. Connect your soundbar to TV through HDMI OUT (ARC). 2 Press repeatedly SOURCE button on the remote control until corresponding HDMI 1/ HDMI 2/ HDMI 3 is displayed on the display panel.

How do I put my JBL soundbar in pairing mode?

Press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly. If the pairing succeeds, the LED indicator on the subwoofer lights up and the soundbar display will show “DONE”. If the pairing fails, the indicator on the subwoofer blinks slowly.

How do I reset my JBL soundbar?

Factory Reset JBL Soundbar You can restore your soundbar to its factory settings by holding down both the “Volume +” and “Virtual Surround” buttons for roughly five seconds.

Why won’t my TV connect to my soundbar?

Make sure that Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Verify that sound is output from the TV after turning on the TV and then the audio device. Make sure that your audio device is set to TV input. Change the TV audio output setting to PCM and check whether sound is output.

How do I connect my subwoofer to my soundbar?

Connect the power cords for the soundbar and the subwoofer to the back of each, and then plug both into a wall outlet. Turn the Soundbar on, and the subwoofer should begin to connect automatically.

Why won’t my Bluetooth connect to my soundbar?

If the pairing is not working, it is typically because it is being performed incorrectly, or the device may need to be reset, updated, or may not be compatible with the soundbar. Soundbars will only pair to a bluetooth device that plays audio, like a TV, tablet, or phone.

What kind of sound does JBL bar 9.1 have?

The JBL Bar 9.1 soundbar brings audio experience of a movie theater into your home with two detachable surround speakers and the added punch of Dolby Atmos® and DTS:X™ 3D sound. With 820 watts of total system power, you can enjoy every Oscar-worthy performance through powerful, crystal-clear audio.

What are the buttons on the JBL bar?

While JBL has sensibly kept the number buttons to a minimum, it does mean that some have more than one function which can be frustrating. At the top is the power button, beneath that are buttons for selecting TV (ARC), Bluetooth and the HDMI input.

Is the JBL bar 9.1 True Wireless with Dolby Atmos?

9.1 Channel Soundbar System with surround speakers and Dolby Atmos® Apple Pay™ Users: By continuing to checkout you understand and agree to our Terms of Sale, Terms of Use and Privacy Policy. In Stock Pre-order today.

How do you mount a JBL bar on a wall?

1. Preparation: a) With the distance of about 2” (50mm) from your TV, stick the supplied wall-mounting template to a wall by using adhesive tapes. b) Use your ballpen tip to mark the screw holder location. Remove the template. c) On the marked location, drill a 4 mm/0.16” hole. 2. Install the support for wall-mounting bracket.

The JBL BAR 9.1 is a 5.1.4-channel soundbar that supports both of the main immersive audio formats – Dolby Atmos and DTS:X. There’s a wireless active subwoofer, and a pair of wireless rear speakers that attach to the main soundbar for recharging.

How to update Sound Bar on Samsung TV?

2 Turn off the soundbar and connect the USB stick containing the software update to the female port on a Micro USB adapter cable. 3 Turn on the Soundbar. Within 3 minutes, UPDATE will be displayed and updating will begin. 4 After the update is complete, the soundbar turns off and on again. Test the Soundbar.

While JBL has sensibly kept the number buttons to a minimum, it does mean that some have more than one function which can be frustrating. At the top is the power button, beneath that are buttons for selecting TV (ARC), Bluetooth and the HDMI input.

1. Preparation: a) With the distance of about 2” (50mm) from your TV, stick the supplied wall-mounting template to a wall by using adhesive tapes. b) Use your ballpen tip to mark the screw holder location. Remove the template. c) On the marked location, drill a 4 mm/0.16” hole. 2. Install the support for wall-mounting bracket.