How do I connect my graphic equalizer to my AV receiver?

Plug a pair of RCA audio cables into the input sockets on the rear of the graphic equalizer. Connect the other end to the “Tape Monitor” outputs on the rear of the receiver. Connect a second pair of audio cables to the “Tape Monitor” inputs on the rear panel of the receiver.

How do you control a graphic equalizer?

With a digital EQ, you typically click on a control point and drag up to boost or down to cut. For example, if you wanted to boost audio in the 100 Hz frequency range, you’d either push the 100 Hz slider upward (analog) or click and drag it upward (digital).

Are graphic equalizers worth it?

Setting Up a Graphic Equalizer. If you want a great sounding setup without spending gobs of money to replace your stereo, speakers, or phono cartridge, a graphic equalizer is the best investment you can make. Most equalizers have RCA jacks for easy setup. Many audiophiles recommend using the tape loop on your receiver.

What happened to graphic equalizers?

They are gone because analog equalization is no longer used in the Pro space, replaced entirely by digital filters in Digital Audio Workstations (DAWs) or even simple music playback software.

Can a DSP equalizer work with an Onkyo?

ANone that I know of. Equalizer/DSP units with snazzy graphic displays were a hot item a few decades back, but they’ve since disappeared from the market. I’m speculating that A/V gear makers have low tolerance for such frivolity in the HDMI era. The bad news here is that your Onkyo, like many other modern-day receivers, lacks a tape loop output.

Can a graphic equalizer connect to a stereo amp?

Is it possible to connect a graphic equalizer to a stereo amp (or, in my case, an Onkyo TX-8555 stereo receiver) that doesn’t have a TAPE 2 loop? My receiver only has a TAPE IN/OUT, which I connect to my Tascam CD recorder’s analog ins and outs, but is there a way to connect an EQ without the typical TAPE 2 jacks?

Can you use the Onkyo tx-nr838 as an equalizer?

With this setup, you won’t be able to utilize the Technics’ equalizer and DSP modes (the Onkyo TX- NR838 has plenty of its own), but you will get your graphic audio waveform display back. That was the important thing, right?

What are the benefits of using an Onkyo receiver?

The main benefit is that you’d be able to view the undulating audio waveforms on its front display while simultaneously digging the effect of its Spatializer Church, Stadium, and Disco DSP modes with music. Now for the good news: your new Onkyo receiver has a second zone analog audio output.

ANone that I know of. Equalizer/DSP units with snazzy graphic displays were a hot item a few decades back, but they’ve since disappeared from the market. I’m speculating that A/V gear makers have low tolerance for such frivolity in the HDMI era. The bad news here is that your Onkyo, like many other modern-day receivers, lacks a tape loop output.

With this setup, you won’t be able to utilize the Technics’ equalizer and DSP modes (the Onkyo TX- NR838 has plenty of its own), but you will get your graphic audio waveform display back. That was the important thing, right?

Is it possible to connect a graphic equalizer to a stereo amp (or, in my case, an Onkyo TX-8555 stereo receiver) that doesn’t have a TAPE 2 loop? My receiver only has a TAPE IN/OUT, which I connect to my Tascam CD recorder’s analog ins and outs, but is there a way to connect an EQ without the typical TAPE 2 jacks?

What do you need to know about Onkyo setup?

The Basic Manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings. AV RECEIVER TX-NR656 > Before start > Hookup > Setup > Playback > Part Names > Advanced Manual