How do I connect my Bose 901 Series VI equalizer?
How do I connect my Bose 901 Series VI equalizer?
Connect the amplifier INPUT of the Bose® 901® active equalizer to the PRE AMP OUT jacks of the receiver or amplifier. Connect right channel to right channel and left to left. 4. Connect the amplifier OUTPUT of the active equalizer to the MAIN AMP IN jacks on the receiver or amplifier.
Can you use Bose 901 without equalizer?
You can use the Bose without the EQ but they won’t sound as they are supposed to. If you can’t find the Bose EQ for your series 901 then get any graphic equalizer and adjust the sound to your taste. Add bass from about 60hz down. Add high frequencies to taste.
Can you use a Bose 901 without an equalizer?
Do you need an external power amplifier for a Bose equilizer?
But, not all hope is lost. Your only option is to take your signal from the main outputs on the back of your unit, feed it to the equalizers input and then take the equalizers output and feed it to an external power amplifier. Yes, you will need an external power amp to do this.
Can a Bose EQ be used on a modern receiver?
It turns out, though, that many modern home theater receivers have an automatic EQ system which can be used instead of the separate box that Bose provides. It will not be the same, as the automatic EQ will not merely compensate for the speakers, but also for the room effects of placement.
Can a Bose 901 be used as an AVR?
The Bose 901 is a nifty speaker but their mandatory use of an equalizer makes them a bad choice for AVRs. Here’s a copy of your owners manual.
You can use the Bose without the EQ but they won’t sound as they are supposed to. If you can’t find the Bose EQ for your series 901 then get any graphic equalizer and adjust the sound to your taste. Add bass from about 60hz down. Add high frequencies to taste.
Where does the Bose eq901b-i / II install?
The EQ901B-I/II features dual equalization curves, normal and enhanced, which will accommodate your Series I/II depending on personal preference. The EQ901B-I/II installs in your tape monitor loop, pre-out/pre-in loop, or between your preamp and power amp.
The Bose 901 is a nifty speaker but their mandatory use of an equalizer makes them a bad choice for AVRs. Here’s a copy of your owners manual.
It turns out, though, that many modern home theater receivers have an automatic EQ system which can be used instead of the separate box that Bose provides. It will not be the same, as the automatic EQ will not merely compensate for the speakers, but also for the room effects of placement.
