How do I change the password on my Samsung Galaxy DVR?

If you have forgotten the admin password or are otherwise locked out, you can try these methods of resetting the recorder: On the front panel, press MODE+ PTZ together for 5 seconds. Press on remote control after a clean boot: FREEZE-ALARM-FREEZE-ALARM-FREEZE-RETURN.

How do I program my DVR from my phone?

How to Set Recordings on a Mobile Device

1. Locate the program you’d like to record from the Guide or through Search.
2. Choose a program for details.
3. Select Recording Options.
4. A list of Spectrum receivers will appear.
5. Once the program’s recorded, it’ll appear on the DVR list on the associated Spectrum receiver.

Can I set my DVR remotely?

The Remote DVR App allows you to use your mobile devices to schedule recordings for later viewing on your DVR. Download the app today to identify favorite channels for quick and easy access, schedule program or series recordings, and manage DVR space by canceling or deleting unwanted recordings.

How to set up a Samsung sde-5001 DVR online?

The SDE-5001 device comes with Dynamic DNS support through their service. When you register your device at this site, you also create a Product ID. The URL will then become part of the URL (i.e. ).

What are the ports for a Samsung DVR?

Multi browsers are enabled only if the TCP port is set to between 4505 and 4530 with the Web Viewer port of 80. This is a security measure in order to enable Silverlight. Basically it means that the Samsung DVR really only works with Internet Explorer. You also appear to need to set TCP ports 4505-4530 open, as well as port 80 to make it work.

How can I upgrade my Samsung DVR to 32GB?

If the DVR recognizes there is a USB device (USB hard drives may not work), it will indicate a “Upgrade Software” button that you can use. I tried several times and often got “Upgrade Failed”, so I eventually decided to unzip the image and place it on the same drive while switching to a smaller 32GB flash drive.

What’s the latest firmware for the Samsung DVR?

I noticed today that Samsung has released the 1.0.2 firmware that probably fixed this bug (), but there are very few instructions about how to go about doing so. The first thing you need to do is to verify which firmware to use, since some of Samsung’s firmware include material codes.