How do I change the fuse in my Bose Wave radio?

How to Replace Fuses in Bose Wave Radios

1. Unplug the Bose Wave radio to prevent possible shocks while replacing the fuse.
2. Turn the radio over and remove the three Phillips-head screws from the bottom panel.
3. Locate the power transformer on the back-left side of the main circuit board.

How to install a Bose Wave music system?

Install in accordance with the manufacturer’s instructions – To ensure reliable operation of the product and to protect it from overheating, put the product in a position and location that will not interfere with its proper ventilation. For example, do not place the product on a bed, sofa, or similar surface that may block the ventilation openings.

Why is my Bose Wave Radio not working?

If you have difficulty receiving a clear signal of distant stations, we can help. To maximize the receiver sensitivity, the power cord antenna circuits inside the radio need to be disabled. This will improve the match between the external FM antenna jack to the tuner.

Where is the power cord on a Bose Wave Radio?

Double check that the power cord is connected to both the Bose Wave Radio and a wall outlet. If not plugged in at both ends, plug in the cord to the back of the speaker and the outlet. Make sure that the Bose Wave Radio is set to the input that you want to use. To use the AUX input, press the AUX button.

Where are the caution marks on a Bose Wave Radio?

These CAUTION marks are located on the bottom and rear of your Wave®radio/CD : The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

Why is my Bose Wave Radio not playing?

With ALARM 2 flashing, press ALARM MODE or ALARM until the display shows no Alarm 2 mode indicators. You cannot set the clock to the correct time. Hold down the CLOCK SET button and press TUNING up or down. Release the TUNING button to stop. I can play one cd with sound. The radio has no sound. Also, I can’t get the attached 5 disc cd to play.

Why does my Bose CD player not work?

1. Wave Radio/CD wont read disc. 2. Wave Radio/ CD won’t turn on, no display or display flashes “Please Wait” no remote response. 3. Wave Radio/ CD buttons on CD door not working or intermittent. 4. Wave Radio/ CD Distortion or no sound in AM & FM.

What to do if Bose Wave Radio awr1-1w is not working?

With ALARM 2 flashing, press ALARM MODE or ALARM until the display shows no Alarm 2 mode indicators. You cannot set the clock to the correct time. Hold down the CLOCK SET button and press TUNING up or down. Release the TUNING button to stop.

Double check that the power cord is connected to both the Bose Wave Radio and a wall outlet. If not plugged in at both ends, plug in the cord to the back of the speaker and the outlet. Make sure that the Bose Wave Radio is set to the input that you want to use. To use the AUX input, press the AUX button.